arm64: dts: rockchip: add gpio-keys to Qnap-TS433
From: Heiko Stuebner <heiko@...> Date: Sun, 21 Jul 2024 11:31:53 +0200
Commit-Message
The TS433 has 3 buttons, power and copy in the front as well as a reset pinhole button on the back. The power-button is connected to the embedded controller while the other two buttons are just gpio connected. Add the gpio-keys definition for the two buttons we can handle right now. Tested-by: Uwe Kleine-König <ukleinek@...> Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
.../boot/dts/rockchip/rk3568-qnap-ts433.dts | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+)
Statistics
- 29 lines added
- 0 lines removed
Changes
-------------- arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts --------------
index 34fc31ea9a39a..9f964b6f411c9 100644
@@ -6,6 +6,7 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include "rk3568.dtsi"
@@ -24,6 +25,24 @@ chosen {
stdout-path = "serial2:115200n8";
};
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <©_button_pin>, <&reset_button_pin>;
+ pinctrl-names = "default";
+
+ key-copy {
+ label = "copy";
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_COPY>;
+ };
+
+ key-reset {
+ label = "reset";
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -202,6 +221,16 @@ &pcie3x2 {
};
&pinctrl {
+ keys {
+ copy_button_pin: copy-button-pin {
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ reset_button_pin: reset-button-pin {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
leds {
hdd1_led_pin: hdd1-led-pin {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;