arm64: dts: rockchip: enable sata1+2 on Qnap-TS433
From: Heiko Stuebner <heiko@...> Date: Sat, 20 Jul 2024 21:30:03 +0200
Commit-Message
The TS433 has 4 bays. The last two are accessed via a pci-connected sata controller, while the first two are accessed via the rk3568's sata controllers. Enable these two now. Tested-by: Uwe Kleine-König <ukleinek@...> Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
.../boot/dts/rockchip/rk3568-qnap-ts433.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
Statistics
- 18 lines added
- 0 lines removed
Changes
-------------- arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts --------------
index be1c2286c2d3f..40af4dd0e4158 100644
@@ -80,6 +80,16 @@ &combphy0 {
status = "okay";
};
+/* connected to sata1 */
+&combphy1 {
+ status = "okay";
+};
+
+/* connected to sata2 */
+&combphy2 {
+ status = "okay";
+};
+
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -156,6 +166,14 @@ vcc5v0_otg_en: vcc5v0-otg-en {
};
};
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;