From: Heiko Stuebner <heiko@...>
Date: Mon, 2 Dec 2013 15:52:21 +0100
Commit-Message
Starting with the s3c2443 the s3c24xx series got a new clock tree
compared to the previous s3c24xx socs. This binding describes the
clock controller found in the s3c2443, s3c2416 and s3c2450 socs.
Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
.../bindings/clock/samsung,s3c2443-clock.txt | 46 ++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
Statistics
- 46 lines added
- 0 lines removed
Changes
@@ -0,0 +1,46 @@
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+ - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+ - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c2443-clock.h header and can be used in device
+tree sources.
+
+Example: Clock controller node:
+
+ clocks: clock-controller@4c000000 {
+ compatible = "samsung,s3c2416-clock";
+ reg = <0x4c000000 0x40>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ serial@50004000 {
+ compatible = "samsung,s3c2440-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ status = "disabled";
+ };