ARM: dts: rockchip: add rk3188 lcd controller nodes
From: Heiko Stuebner <heiko@...> Date: Mon, 17 Apr 2017 22:08:28 +0200
Commit-Message
Add the core display subsystem and vop nodes to rk3188. Vop0 has a fully dedicated set of pins and only vop1 needs to do pinctrl to have display output, so also add the necessary pinctrl entries for it. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
changes in v2: - drop default pinctrl setting Boards may use different output signals not needing all pins. arch/arm/boot/dts/rk3188.dtsi | 84 +++++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+)
Statistics
- 82 lines added
- 0 lines removed
Changes
------------------------ arch/arm/boot/dts/rk3188.dtsi -------------------------
index aa123f93f181..ff607f11f5b0 100644
@@ -56,6 +56,11 @@
};
};
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop0_out>, <&vop1_out>;
+ };
+
sram: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x8000>;
@@ -69,6 +74,38 @@
};
};
+ vop0: vop@1010c000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010c000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop0_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vop1: vop@1010e000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010e000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop1_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
timer3: timer@2000e000 {
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x2000e000 0x20>;
@@ -309,6 +348,51 @@
};
};
+ lcdc1 {
+ lcdc1_dclk: lcdc1-dclk {
+ rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_den: lcdc1-den {
+ rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_hsync: lcdc1-hsync {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_vsync: lcdc1-vsync {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_rgb24: ldcd1-rgb24 {
+ rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;