nvmem: Add driver for the eeprom in qnap-mcu controllers
From: Heiko Stuebner <heiko@...> Date: Wed, 30 Jul 2025 19:22:48 +0200
Commit-Message
The qnap-mcu also has an eeprom connected to it, that contains some specific product-information like the mac addresses for the network interfaces. Add a nvmem driver for it. Signed-off-by: Heiko Stuebner <heiko@...> Acked-by: Srinivas Kandagatla <srini@...>
Patch-Comment
drivers/nvmem/Kconfig | 9 +++ drivers/nvmem/Makefile | 2 + drivers/nvmem/qnap-mcu-eeprom.c | 110 ++++++++++++++++++++++++++++++++ 3 files changed, 121 insertions(+) create mode 100644 drivers/nvmem/qnap-mcu-eeprom.c
Statistics
- 121 lines added
- 0 lines removed
Changes
---------------------------- drivers/nvmem/Kconfig -----------------------------
index edd811444ce5..41c814eb90b5 100644
@@ -264,6 +264,15 @@ config NVMEM_QCOM_SEC_QFPROM
This driver can also be built as a module. If so, the module will be called
nvmem_sec_qfprom.
+config NVMEM_QNAP_MCU_EEPROM
+ tristate "QNAP MCU EEPROM Support"
+ depends on MFD_QNAP_MCU
+ help
+ Say y here to enable support for accessing the EEPROM attached to
+ QNAP MCU devices. This EEPROM contains additional runtime device
+ information, like MAC addresses for ethernet devices that do not
+ contain their own mac storage.
+
config NVMEM_RAVE_SP_EEPROM
tristate "Rave SP EEPROM Support"
depends on RAVE_SP_CORE
---------------------------- drivers/nvmem/Makefile ----------------------------
index 2021d59688db..21b3ae1c57e8 100644
@@ -54,6 +54,8 @@ obj-$(CONFIG_NVMEM_QCOM_QFPROM) += nvmem_qfprom.o
nvmem_qfprom-y := qfprom.o
obj-$(CONFIG_NVMEM_QCOM_SEC_QFPROM) += nvmem_sec_qfprom.o
nvmem_sec_qfprom-y := sec-qfprom.o
+obj-$(CONFIG_NVMEM_QNAP_MCU_EEPROM) += nvmem-qnap-mcu-eeprom.o
+nvmem-qnap-mcu-eeprom-y := qnap-mcu-eeprom.o
obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o
obj-$(CONFIG_NVMEM_RCAR_EFUSE) += nvmem-rcar-efuse.o
----------------------- drivers/nvmem/qnap-mcu-eeprom.c ------------------------
new file mode 100644
index 000000000000..fea1e7b91764
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ee1004 - driver for DDR4 SPD EEPROMs
+ *
+ * Copyright (C) 2017-2019 Jean Delvare
+ *
+ * Based on the at24 driver:
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ */
+
+#include <linux/mfd/qnap-mcu.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+/* Determined by trial and error until read anomalies appeared */
+#define QNAP_MCU_EEPROM_SIZE 256
+#define QNAP_MCU_EEPROM_BLOCK_SIZE 32
+
+static int qnap_mcu_eeprom_read_block(struct qnap_mcu *mcu, unsigned int offset,
+ void *val, size_t bytes)
+{
+ const u8 cmd[] = { 0xf7, 0xa1, offset, bytes };
+ u8 *reply;
+ int ret = 0;
+
+ reply = kzalloc(bytes + sizeof(cmd), GFP_KERNEL);
+ if (!reply)
+ return -ENOMEM;
+
+ ret = qnap_mcu_exec(mcu, cmd, sizeof(cmd), reply, bytes + sizeof(cmd));
+ if (ret)
+ goto out;
+
+ /* First bytes must mirror the sent command */
+ if (memcmp(cmd, reply, sizeof(cmd))) {
+ ret = -EIO;
+ goto out;
+ }
+
+ memcpy(val, reply + sizeof(cmd), bytes);
+
+out:
+ kfree(reply);
+ return ret;
+}
+
+static int qnap_mcu_eeprom_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+ struct qnap_mcu *mcu = priv;
+ int pos = 0, ret;
+ u8 *buf = val;
+
+ if (unlikely(!bytes))
+ return 0;
+
+ while (bytes > 0) {
+ size_t to_read = (bytes > QNAP_MCU_EEPROM_BLOCK_SIZE) ?
+ QNAP_MCU_EEPROM_BLOCK_SIZE : bytes;
+
+ ret = qnap_mcu_eeprom_read_block(mcu, offset + pos, &buf[pos], to_read);
+ if (ret < 0)
+ return ret;
+
+ pos += to_read;
+ bytes -= to_read;
+ }
+
+ return 0;
+}
+
+static int qnap_mcu_eeprom_probe(struct platform_device *pdev)
+{
+ struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
+ struct nvmem_config nvcfg = {};
+ struct nvmem_device *ndev;
+
+ nvcfg.dev = &pdev->dev;
+ nvcfg.of_node = pdev->dev.parent->of_node;
+ nvcfg.name = dev_name(&pdev->dev);
+ nvcfg.id = NVMEM_DEVID_NONE;
+ nvcfg.owner = THIS_MODULE;
+ nvcfg.type = NVMEM_TYPE_EEPROM;
+ nvcfg.read_only = true;
+ nvcfg.root_only = false;
+ nvcfg.reg_read = qnap_mcu_eeprom_read;
+ nvcfg.size = QNAP_MCU_EEPROM_SIZE,
+ nvcfg.word_size = 1,
+ nvcfg.stride = 1,
+ nvcfg.priv = mcu,
+
+ ndev = devm_nvmem_register(&pdev->dev, &nvcfg);
+ if (IS_ERR(ndev))
+ return PTR_ERR(ndev);
+
+ return 0;
+}
+
+static struct platform_driver qnap_mcu_eeprom_driver = {
+ .probe = qnap_mcu_eeprom_probe,
+ .driver = {
+ .name = "qnap-mcu-eeprom",
+ },
+};
+module_platform_driver(qnap_mcu_eeprom_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("QNAP MCU EEPROM driver");
+MODULE_LICENSE("GPL");