dt-bindings: add documentation for rk3188 clock and reset unit
From: Heiko Stuebner <heiko@...> Date: Sun, 13 Apr 2014 18:48:28 +0200
Commit-Message
This add bindings documentation for the clock and reset unit found on rk3188 and rk3066 SoCs from Rockchip. Also deprecate the old gate clock binding, as these shouldn't be used in the future. Signed-off-by: Heiko Stuebner <heiko@...> Acked-By: Max Schwarz <max.schwarz@...> Tested-By: Max Schwarz <max.schwarz@...>
Patch-Comment
.../bindings/clock/rockchip,rk3188-cru.txt | 61 ++++++++++++++++++++++ .../devicetree/bindings/clock/rockchip.txt | 3 ++ 2 files changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
Statistics
- 64 lines added
- 0 lines removed
Changes
------- Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt --------
new file mode 100644
index 0000000..0c2bf5e
@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+ "rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
------------- Documentation/devicetree/bindings/clock/rockchip.txt -------------
index a891c82..22f6769 100644
@@ -6,6 +6,9 @@ This binding uses the common clock binding[1].
== Gate clocks ==
+These bindings are deprecated!
+Please use the soc specific CRU bindings instead.
+
The gate registers form a continuos block which makes the dt node
structure a matter of taste, as either all gates can be put into
one gate clock spanning all registers or they can be divided into