Expand available features on Qnap TS433

A patchset in state Mainline for linux-kernel

From: Heiko Stuebner <heiko@...> Date: Sun, 21 Jul 2024 19:15:08 +0200

Thanks to the nicely supported rk3568, the hardest part for adding things, is to pull things from the vendor-kernel and translating them to mainline standards. This series allows the TS433 to use all 4 bays [0], wiggle some LEDs and access devices connected to all 3 usb ports. The device runs stable now and might be usable for actual usage. There is still a todo-list though: - the ethernet mac address for the realtek chip seems correct, but the gmac0 interface currently uses a wrong one - i2cdetect reports devices on i2c-1 on addresses 54,55,56,57 model_Q0B20_Q0B30_10_10.conf from the original rescue image labels them VPD_MB = I2C:0x54, VPD_BP = I2C:0x56 the meaning currently being unknown. Some eeprom maybe? - The regulator tree is slightly dubious. Everthing seems to follow rk3568 reference designs, but especially the regulator labeled vcc3v3_sd seems to supply some PCIe functionality. So I guess the device's schematics will look quite different than the regulators added to the vendor devicetree. - Quite a bit of functionality is provided by the MCU connected to uart0. According to the model.conf there should be fan-control, a number of additional LEDs (status,locate,usb?) Thanks to Qnap engineers adding an easily accessible header for maskrom mode on the board, replacing the bootloader is also quite a breeze. A branch on top of today's u-boot master branch can be found on [1]. I'll submit that code to u-boot once I can cherry-pick the dts patches. changes in v2: - add patches for tsadc, gpio-keys, cpu-supply, pmic, gpu and io-domains [0] I only have two drives right now, but I tested both the internal sata connector as well as the PCIe connected sata controller in different combinations. [1] https://github.com/mmind/u-boot-rockchip/tree/dev/qnap-ts433/v2024.07 Heiko Stuebner (14): arm64: dts: rockchip: add PCIe supply regulator to Qnap-TS433 arm64: dts: rockchip: enable second PCIe controller on the Qnap-TS433 arm64: dts: rockchip: enable uart0 on Qnap-TS433 arm64: dts: rockchip: enable usb ports on Qnap-TS433 arm64: dts: rockchip: add stdout path on Qnap-TS433 arm64: dts: rockchip: enable sata1+2 on Qnap-TS433 arm64: dts: rockchip: add board-aliases for Qnap-TS433 arm64: dts: rockchip: add hdd leds to Qnap-TS433 arm64: dts: rockchip: enable the tsadc on the Qnap-TS433 arm64: dts: rockchip: add gpio-keys to Qnap-TS433 arm64: dts: rockchip: define cpu-supply on the Qnap-TS433 arm64: dts: rockchip: add missing pmic information on Qnap-TS433 arm64: dts: rockchip: enable gpu on Qnap-TS433 arm64: dts: rockchip: add 2 pmu_io_domain supplies for Qnap-TS433 .../boot/dts/rockchip/rk3568-qnap-ts433.dts | 539 +++++++++++++++++- 1 file changed, 536 insertions(+), 3 deletions(-) -- 2.39.2

Patches in this set

Statistics

  • 14 individual patches
  • 536 lines added
  • 3 lines removed
 

Recent Patches

About Us

Sed lacus. Donec lectus. Nullam pretium nibh ut turpis. Nam bibendum. In nulla tortor, elementum vel, tempor at, varius non, purus. Mauris vitae nisl nec metus placerat consectetuer.

Read More...