Input: zforce - add devicetree support
From: Heiko Stübner <heiko.stuebner@...> Date: Mon, 27 Jan 2014 20:37:21 +0000
Commit-Message
This makes the zforce driver usable on devicetree-based platforms too. Signed-off-by: Heiko Stuebner <heiko.stuebner@...> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...>
Patch-Comment
-- cgit v0.9.2
Statistics
- 85 lines added
- 2 lines removed
Changes
------ Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt -------
new file mode 100644
index 0000000..2faf1f1
@@ -0,0 +1,30 @@
+* Neonode infrared touchscreen controller
+
+Required properties:
+- compatible: must be "neonode,zforce"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+ first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ zforce_ts@50 {
+ compatible = "neonode,zforce";
+ reg = <0x50>;
+ interrupts = <2 0>;
+
+ gpios = <&gpio5 6 0>, /* INT */
+ <&gpio5 9 0>; /* RST */
+
+ x-size = <800>;
+ y-size = <600>;
+ };
+
+ /* ... */
+ };
-------------------- drivers/input/touchscreen/zforce_ts.c ---------------------
index 91f4c7c..bdc936c 100644
@@ -29,6 +29,8 @@
#include <linux/sysfs.h>
#include <linux/input/mt.h>
#include <linux/platform_data/zforce_ts.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#define WAIT_TIMEOUT msecs_to_jiffies(1000)
@@ -681,6 +683,45 @@ static void zforce_reset(void *data)
gpio_set_value(ts->pdata->gpio_rst, 0);
}
+static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
+{
+ struct zforce_ts_platdata *pdata;
+ struct device_node *np = dev->of_node;
+
+ if (!np)
+ return ERR_PTR(-ENOENT);
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "failed to allocate platform data\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pdata->gpio_int = of_get_gpio(np, 0);
+ if (!gpio_is_valid(pdata->gpio_int)) {
+ dev_err(dev, "failed to get interrupt gpio\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata->gpio_rst = of_get_gpio(np, 1);
+ if (!gpio_is_valid(pdata->gpio_rst)) {
+ dev_err(dev, "failed to get reset gpio\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_property_read_u32(np, "x-size", &pdata->x_max)) {
+ dev_err(dev, "failed to get x-size property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_property_read_u32(np, "y-size", &pdata->y_max)) {
+ dev_err(dev, "failed to get y-size property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return pdata;
+}
+
static int zforce_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -689,8 +730,11 @@ static int zforce_probe(struct i2c_client *client,
struct input_dev *input_dev;
int ret;
+ if (!pdata) {
+ pdata = zforce_parse_dt(&client->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ }
ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL);
if (!ts)
@@ -826,11 +870,20 @@ static struct i2c_device_id zforce_idtable[] = {
};
MODULE_DEVICE_TABLE(i2c, zforce_idtable);
+#ifdef CONFIG_OF
+static struct of_device_id zforce_dt_idtable[] = {
+ { .compatible = "neonode,zforce" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, zforce_dt_idtable);
+#endif
+
static struct i2c_driver zforce_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "zforce-ts",
.pm = &zforce_pm_ops,
+ .of_match_table = of_match_ptr(zforce_dt_idtable),
},
.probe = zforce_probe,
.id_table = zforce_idtable,