arm64: dts: rockchip: add usb-id extcon on rk3588 tiger
From: Heiko Stuebner <heiko.stuebner@...> Date: Mon, 22 Apr 2024 16:36:38 +0200
Commit-Message
The Q7 standard specifies a usb-id pin on the connector to distiuish between host and device mode. Model this via the usb-id extcon binding. While the pin is part of the Q7 standard, so part of the module, the extcon stays disabled in the som dtsi and will only be enabled in a baseboard using it. Signed-off-by: Heiko Stuebner <heiko.stuebner@...>
Patch-Comment
arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
Statistics
- 15 lines added
- 0 lines removed
Changes
---------------- arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi ----------------
index 4984e36a8c2d..cafb40283882 100644
@@ -23,6 +23,14 @@ emmc_pwrseq: emmc-pwrseq {
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
};
+ extcon_usb3: extcon-usb3 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_id>;
+ status = "disabled";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -327,6 +335,13 @@ module_led_pin: module-led-pin {
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb3 {
+ usb3_id: usb3-id {
+ rockchip,pins =
+ <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&saradc {