arm64: dts: rockchip: move uart2 pinmux to dtsi on
From: Heiko Stuebner <heiko.stuebner@...> Date: Fri, 19 Apr 2024 09:59:24 +0200
Commit-Message
The association of uart2 to the q7-uart pins is part of the module itself and not the baseboard used. Therefore move the pinctrl over to the tiger dtsi. Signed-off-by: Heiko Stuebner <heiko.stuebner@...> Reviewed-by: Quentin Schulz <quentin.schulz@...>
Patch-Comment
changes in v2: - add comment specifying where the signals go to on the Q7 connector - add Quentin's review arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts | 1 - arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 5 +++++ 2 files changed, 5 insertions(+), 1 deletion(-)
Statistics
- 5 lines added
- 1 lines removed
Changes
------------- arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts -------------
index d672198c6b64..9bdd14799eff 100644
@@ -231,7 +231,6 @@ &u2phy3_host {
};
&uart2 {
status = "okay";
};
---------------- arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi ----------------
index 72fe696b0034..4984e36a8c2d 100644
@@ -688,6 +688,11 @@ &tsadc {
status = "okay";
};
+/* Routed to UART0 on the Q7 connector */
+&uart2 {
+ pinctrl-0 = <&uart2m2_xfer>;
+};
+
/* Mule-ATtiny UPDI */
&uart4 {
pinctrl-0 = <&uart4m2_xfer>;