arm64: dts: rockchip: set correct pwm0 pinctrl on
From: Heiko Stuebner <heiko.stuebner@...> Date: Mon, 3 Jun 2024 21:00:46 +0200
Commit-Message
PWM0 on rk3588-tiger is connected to the BLT_CTRL pin of the Q7 connector meant as the name implies to control a backlight device. Therefore set the correct M1 pinctrl variant for it. The M0 variant cannot ever be used because that pin is routed to a connector pin on the Q7 connector that is reserved for CAN use and the pin reachable by the M2 variant is reserved for the embedded MCU on the SoM. Fixes: 6173ef24b35b ("arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM") Signed-off-by: Heiko Stuebner <heiko.stuebner@...>
Patch-Comment
arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
Statistics
- 5 lines added
- 0 lines removed
Changes
---------------- arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi ----------------
index 0c1115cdee22c..f870f84da1e6d 100644
@@ -352,6 +352,11 @@ usb3_id: usb3-id {
};
};
+&pwm0 {
+ pinctrl-0 = <&pwm0m1_pins>;
+ pinctrl-names = "default";
+};
+
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";