From: Heiko Stuebner <heiko@...>
Date: Sat, 11 May 2013 13:30:43 +0200
Commit-Message
Each dma channel has its own clock. The upcoming dma driver wants to
handle these itself and therefore needs to be able to get the correct
clock for a channel.
Therefore rename the dma clocks to "dma.X" for s3c2412, s3c2416 and
s3c2443. This does not change the behaviour for the old dma driver at
all, as all dma clocks are still always on and not handled by the old
dma driver at all.
Signed-off-by: Heiko Stuebner <heiko@...>
Acked-by: Linus Walleij <linus.walleij@...>
Patch-Comment
changes since v2:
- remove noise from commit message
arch/arm/mach-s3c24xx/clock-s3c2412.c | 8 ++++----
arch/arm/mach-s3c24xx/common-s3c2443.c | 12 ++++++------
2 files changed, 10 insertions(+), 10 deletions(-)
Statistics
- 10 lines added
- 10 lines removed
Changes
@@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = {
static struct clk init_clocks[] = {
{
- .name = "dma",
+ .name = "dma.0",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA0,
}, {
- .name = "dma",
+ .name = "dma.1",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA1,
}, {
- .name = "dma",
+ .name = "dma.2",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA2,
}, {
- .name = "dma",
+ .name = "dma.3",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA3,
@@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = {
static struct clk init_clocks[] = {
{
- .name = "dma",
+ .name = "dma.0",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA0,
}, {
- .name = "dma",
+ .name = "dma.1",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA1,
}, {
- .name = "dma",
+ .name = "dma.2",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA2,
}, {
- .name = "dma",
+ .name = "dma.3",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA3,
}, {
- .name = "dma",
+ .name = "dma.4",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA4,
}, {
- .name = "dma",
+ .name = "dma.5",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA5,