ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion

A patch from »ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion« in state Mainline for linux-kernel

From: Heiko Stuebner <heiko@...> Date: Thu, 24 Apr 2014 08:45:46 +0200

Commit-Message

This finally removes all remaining SAMSUNG_CLOCK conditional code from s3c24xx architectures. Signed-off-by: Heiko Stuebner <heiko@...>

Patch-Comment

This is of course meant to go on top of the s3c2410 ccf conversion arch/arm/mach-s3c24xx/Kconfig | 5 ----- arch/arm/mach-s3c24xx/common.c | 17 ----------------- arch/arm/mach-s3c24xx/cpufreq-utils.c | 6 ------ arch/arm/mach-s3c24xx/mach-anubis.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-bast.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-osiris.c | 27 --------------------------- arch/arm/mach-s3c24xx/mach-rx1950.c | 14 -------------- arch/arm/mach-s3c24xx/mach-vr1000.c | 27 --------------------------- arch/arm/mach-s3c24xx/pm.c | 12 ------------ 9 files changed, 162 deletions(-)

Statistics

  • 0 lines added
  • 162 lines removed

Changes

------------------------ arch/arm/mach-s3c24xx/Kconfig -------------------------
index 77b0fb5..4500802 100644
@@ -265,7 +265,6 @@ config ARCH_BAST
select ISA
select MACH_BAST_IDE
select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
- select S3C24XX_DCLK if SAMSUNG_CLOCK
select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
@@ -347,7 +346,6 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select MACH_BAST_IDE
- select S3C24XX_DCLK if SAMSUNG_CLOCK
select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
@@ -533,7 +531,6 @@ config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select HAVE_PATA_PLATFORM
select S3C2440_XTAL_12000000
- select S3C24XX_DCLK if SAMSUNG_CLOCK
select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
@@ -574,7 +571,6 @@ config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
- select S3C24XX_DCLK if SAMSUNG_CLOCK
select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
@@ -646,7 +642,6 @@ config MACH_RX1950
select PM_H1940 if PM
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
- select S3C24XX_DCLK if SAMSUNG_CLOCK
select S3C24XX_COMMON_DCLK if COMMON_CLK
select S3C24XX_PWM
select S3C_DEV_NAND
------------------------ arch/arm/mach-s3c24xx/common.c ------------------------
index 600a1be..c0763b8 100644
@@ -307,23 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
},
};
-/* initialise all the clocks */
-
-#ifdef CONFIG_SAMSUNG_CLOCK
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk)
-{
- clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
- clk_xtal.rate);
-
- clk_mpll.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-}
-#endif
-
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
static struct resource s3c2410_dma_resource[] = {
-------------------- arch/arm/mach-s3c24xx/cpufreq-utils.c ---------------------
index c1b7508..d4d9514 100644
@@ -61,12 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
*/
void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
{
-#ifdef CONFIG_SAMSUNG_CLOCK
- __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
-#endif
-
-#ifdef CONFIG_COMMON_CLK
if (!IS_ERR(cfg->mpll))
clk_set_rate(cfg->mpll, cfg->pll.frequency);
-#endif
}
--------------------- arch/arm/mach-s3c24xx/mach-anubis.c ----------------------
index 7a0d83b..e053581 100644
@@ -364,16 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = {
&anubis_device_sm501,
};
-#ifdef CONFIG_SAMSUNG_CLOCK
-static struct clk *anubis_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-#endif
-
/* I2C devices. */
static struct i2c_board_info anubis_i2c_devs[] __initdata = {
@@ -396,23 +386,6 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
static void __init anubis_map_io(void)
{
-#ifdef CONFIG_SAMSUNG_CLOCK
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-#endif
-
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
---------------------- arch/arm/mach-s3c24xx/mach-bast.c -----------------------
index ea762f2..f9112b8 100644
@@ -537,16 +537,6 @@ static struct platform_device *bast_devices[] __initdata = {
&bast_sio,
};
-#ifdef CONFIG_SAMSUNG_CLK
-static struct clk *bast_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-#endif
-
static struct s3c_cpufreq_board __initdata bast_cpufreq = {
.refresh = 7800, /* 7.8usec */
.auto_io = 1,
@@ -560,23 +550,6 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
static void __init bast_map_io(void)
{
-#ifdef CONFIG_SAMSUNG_CLOCK
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
-#endif
-
s3c_hwmon_set_platdata(&bast_hwmon_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
--------------------- arch/arm/mach-s3c24xx/mach-osiris.c ----------------------
index 3bc2c9b..189147b 100644
@@ -350,16 +350,6 @@ static struct platform_device *osiris_devices[] __initdata = {
&osiris_pcmcia,
};
-#ifdef CONFIG_SAMSUNG_CLOCK
-static struct clk *osiris_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-#endif
-
static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
.refresh = 7800, /* refresh period is 7.8usec */
.auto_io = 1,
@@ -370,23 +360,6 @@ static void __init osiris_map_io(void)
{
unsigned long flags;
-#ifdef CONFIG_SAMSUNG_CLOCK
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-#endif
-
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
--------------------- arch/arm/mach-s3c24xx/mach-rx1950.c ----------------------
index 5f37f52..e2c6541 100644
@@ -728,22 +728,8 @@ static struct platform_device *rx1950_devices[] __initdata = {
&rx1950_leds,
};
-#ifdef CONFIG_SAMSUNG_CLOCK
-static struct clk *rx1950_clocks[] __initdata = {
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
-};
-#endif
-
static void __init rx1950_map_io(void)
{
-#ifdef CONFIG_SAMSUNG_CLOCK
- s3c24xx_clkout0.parent = &clk_h;
- s3c24xx_clkout1.parent = &clk_f;
-
- s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-#endif
-
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
--------------------- arch/arm/mach-s3c24xx/mach-vr1000.c ----------------------
index 5f588bf..f88c584 100644
@@ -299,16 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
&vr1000_led3,
};
-#ifdef CONFIG_SAMSUNG_CLOCK
-static struct clk *vr1000_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-#endif
-
static void vr1000_power_off(void)
{
gpio_direction_output(S3C2410_GPB(9), 1);
@@ -316,23 +306,6 @@ static void vr1000_power_off(void)
static void __init vr1000_map_io(void)
{
-#if CONFIG_SAMSUNG_CLOCK
- /* initialise clock sources */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = NULL;
- s3c24xx_dclk1.rate = 3692307;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
-#endif
-
pm_power_off = vr1000_power_off;
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-------------------------- arch/arm/mach-s3c24xx/pm.c --------------------------
index 3d8cf30..b19256e 100644
@@ -66,18 +66,6 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_BANKCON3),
SAVE_ITEM(S3C2410_BANKCON4),
SAVE_ITEM(S3C2410_BANKCON5),
-
-#ifdef CONFIG_SAMSUNG_CLOCK
- SAVE_ITEM(S3C2410_LOCKTIME),
- SAVE_ITEM(S3C2410_CLKCON),
-#ifndef CONFIG_CPU_FREQ
- SAVE_ITEM(S3C2410_CLKDIVN),
- SAVE_ITEM(S3C2410_MPLLCON),
- SAVE_ITEM(S3C2410_REFRESH),
-#endif
- SAVE_ITEM(S3C2410_UPLLCON),
- SAVE_ITEM(S3C2410_CLKSLOW),
-#endif /* CONFIG_SAMSUNG_CLOCK */
};
/* s3c_pm_check_resume_pin
 
 

Recent Patches

About Us

Sed lacus. Donec lectus. Nullam pretium nibh ut turpis. Nam bibendum. In nulla tortor, elementum vel, tempor at, varius non, purus. Mauris vitae nisl nec metus placerat consectetuer.

Read More...