Commit b27b072791dc (ARM: 7265/1: restart: S3C24XX: use new restart hook)
introduced the new restart hook also for the S3C244x cpus, but it
was only defined in the S3C2440 scope, i.e. when CPU_S3C2440 was
selected. Devices using the S3C2442 like the GTA02 normally don't select
this CPU which leads to compilation errors like:
LD .tmp_vmlinux1
arch/arm/mach-s3c2440/built-in.o:(.arch.info.init+0x3c): undefined reference to `s3c2440_restart'
make: *** [.tmp_vmlinux1] Error 1
Therefore move the s3c2440_restart function to s3c244x.c which is
common to both cpus and also fix the naming to reflect this.
Reported-by: Denis 'GNUtoo' Carikli <GNUtoo@...>
Signed-off-by: Heiko Stuebner <heiko@...>
arch/arm/mach-s3c2440/common.h | 2 +-
arch/arm/mach-s3c2440/mach-anubis.c | 2 +-
arch/arm/mach-s3c2440/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c2440/mach-gta02.c | 2 +-
arch/arm/mach-s3c2440/mach-mini2440.c | 2 +-
arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c2440/mach-osiris.c | 2 +-
arch/arm/mach-s3c2440/mach-rx1950.c | 2 +-
arch/arm/mach-s3c2440/mach-rx3715.c | 2 +-
arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +-
arch/arm/mach-s3c2440/s3c2440.c | 13 -------------
arch/arm/mach-s3c2440/s3c244x.c | 13 +++++++++++++
12 files changed, 23 insertions(+), 23 deletions(-)
@@ -12,6 +12,6 @@
#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
#define __ARCH_ARM_MACH_S3C2440_COMMON_H
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
@@ -35,7 +35,6 @@
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/pm.h>
-#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
-
-void s3c2440_restart(char mode, const char *cmd)
-{
- if (mode == 's') {
- soft_restart(0);
- }
-
- arch_wdt_reset();
-
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
-}
@@ -46,6 +46,7 @@
#include <plat/pm.h>
#include <plat/pll.h>
#include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
@@ -196,3 +197,15 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
.suspend = s3c244x_suspend,
.resume = s3c244x_resume,
};
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ soft_restart(0);
+ }
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}