The bit locations indicating the locking status of the plls on rk3066 are
shifted by one to the right when compared to the rk3188, bits [7:4] instead
of [8:5] on the rk3188, thus indicating the locking state of the wrong pll
or a completely different information in case of the gpll.
The recently introduced pll init code exposed that problem on some rk3066
boards when it tried to bring the boot-pll value in line with the value
from the rate table.
Fix this by defining separate pll definitions for rk3066 with the correct
locking indices.
Signed-off-by: Heiko Stuebner <heiko@...>
drivers/clk/rockchip/clk-rk3188.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
@@ -210,6 +210,17 @@ PNAME(mux_sclk_hsadc_p) = { "hsadc_src", "hsadc_frac", "ext_hsadc" };
PNAME(mux_mac_p) = { "gpll", "dpll" };
PNAME(mux_sclk_macref_p) = { "mac_src", "ext_rmii" };
+static struct rockchip_pll_clock rk3066_pll_clks[] __initdata = {
+ [apll] = PLL(pll_rk3066, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
+ RK2928_MODE_CON, 0, 5, 0, rk3188_pll_rates),
+ [dpll] = PLL(pll_rk3066, PLL_DPLL, "dpll", mux_pll_p, 0, RK2928_PLL_CON(4),
+ RK2928_MODE_CON, 4, 4, 0, NULL),
+ [cpll] = PLL(pll_rk3066, PLL_CPLL, "cpll", mux_pll_p, 0, RK2928_PLL_CON(8),
+ RK2928_MODE_CON, 8, 6, ROCKCHIP_PLL_SYNC_RATE, rk3188_pll_rates),
+ [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK2928_PLL_CON(12),
+ RK2928_MODE_CON, 12, 7, ROCKCHIP_PLL_SYNC_RATE, rk3188_pll_rates),
+};
+
static struct rockchip_pll_clock rk3188_pll_clks[] __initdata = {
[apll] = PLL(pll_rk3066, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
RK2928_MODE_CON, 0, 6, 0, rk3188_pll_rates),
@@ -735,8 +746,8 @@ static void __init rk3188_common_clk_init(struct device_node *np)
static void __init rk3066a_clk_init(struct device_node *np)
{
rk3188_common_clk_init(np);
- rockchip_clk_register_plls(rk3188_pll_clks,
- ARRAY_SIZE(rk3188_pll_clks),
+ rockchip_clk_register_plls(rk3066_pll_clks,
+ ARRAY_SIZE(rk3066_pll_clks),
RK3066_GRF_SOC_STATUS);
rockchip_clk_register_branches(rk3066a_clk_branches,
ARRAY_SIZE(rk3066a_clk_branches));