phy: rockchip: inno-usb2: add phy definition for rk3036
From: Heiko Stuebner <heiko@...> Date: Sat, 3 May 2025 14:34:33 +0200
Commit-Message
The usb2phy on rk3036 is very similar to rk3128 but not 100% identical. While most registers and bits are the same, a small fraction did get moved around. So we can re-use the phy-tuning function, but need a new set a bits. The biggest change might be that the phy on rk3036 does not support the charger detection, that rk3128 (and newer phys) have. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+)
Statistics
- 32 lines added
- 0 lines removed
Changes
---------------- drivers/phy/rockchip/phy-rockchip-inno-usb2.c -----------------
index b5e6a864deeb..32fdd64d7c2a 100644
@@ -1583,6 +1583,37 @@ static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
return ret;
}
+static const struct rockchip_usb2phy_cfg rk3036_phy_cfgs[] = {
+ {
+ .reg = 0x17c,
+ .num_ports = 2,
+ .phy_tuning = rk3128_usb2phy_tuning,
+ .clkout_ctl = { 0x017c, 11, 11, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x017c, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x017c, 14, 14, 0, 1 },
+ .bvalid_det_st = { 0x017c, 15, 15, 0, 1 },
+ .bvalid_det_clr = { 0x017c, 15, 15, 0, 1 },
+ .ls_det_en = { 0x017c, 12, 12, 0, 1 },
+ .ls_det_st = { 0x017c, 13, 13, 0, 1 },
+ .ls_det_clr = { 0x017c, 13, 13, 0, 1 },
+ .utmi_bvalid = { 0x014c, 8, 8, 0, 1 },
+ .utmi_id = { 0x014c, 11, 11, 0, 1 },
+ .utmi_ls = { 0x014c, 10, 9, 0, 1 },
+
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0194, 8, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0194, 14, 14, 0, 1 },
+ .ls_det_st = { 0x0194, 15, 15, 0, 1 },
+ .ls_det_clr = { 0x0194, 15, 15, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rk3128_phy_cfgs[] = {
{
.reg = 0x17c,
@@ -2204,6 +2235,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
+ { .compatible = "rockchip,rk3036-usb2phy", .data = &rk3036_phy_cfgs },
{ .compatible = "rockchip,rk3128-usb2phy", .data = &rk3128_phy_cfgs },
{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },