clk: rockchip: convert rk3036 pll type to use internal
From: Heiko Stuebner <heiko.stuebner@...> Date: Mon, 13 Jan 2020 10:04:56 +0100
Commit-Message
The rk3036 pll type exposes its lock status in both its pllcon registers as well as the General Register Files. To remove one dependency convert it to the "internal" lock status, similar to how rk3399 handles it. Signed-off-by: Heiko Stuebner <heiko.stuebner@...>
Patch-Comment
drivers/clk/rockchip/clk-pll.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-)
Statistics
- 21 lines added
- 3 lines removed
Changes
------------------------ drivers/clk/rockchip/clk-pll.c ------------------------
index 26ca46d49191..a677f1f8fac7 100644
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/clk-provider.h>
+#include <linux/iopoll.h>
#include <linux/regmap.h>
#include <linux/clk.h>
#include "clk.h"
@@ -109,12 +110,29 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
#define RK3036_PLLCON1_REFDIV_SHIFT 0
#define RK3036_PLLCON1_POSTDIV2_MASK 0x7
#define RK3036_PLLCON1_POSTDIV2_SHIFT 6
+#define RK3036_PLLCON1_LOCK_STATUS BIT(10)
#define RK3036_PLLCON1_DSMPD_MASK 0x1
#define RK3036_PLLCON1_DSMPD_SHIFT 12
+#define RK3036_PLLCON1_PWRDOWN BIT(13)
#define RK3036_PLLCON2_FRAC_MASK 0xffffff
#define RK3036_PLLCON2_FRAC_SHIFT 0
+static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll)
+{
+ u32 pllcon;
+ int ret;
+
+ /*
+ * Lock time typical 250, max 500 input clock cycles @24MHz
+ * So define a very safe maximum of 1000us, meaning 24000 cycles.
+ */
+ ret = readl_poll_timeout(pll->reg_base + RK3036_PLLCON(1), pllcon,
+ pllcon & RK3036_PLLCON1_LOCK_STATUS, 0, 1000);
+ if (ret)
+ pr_err("%s: timeout waiting for pll to lock\n", __func__);
+
+ return ret;
+}
static void rockchip_rk3036_pll_get_params(struct rockchip_clk_pll *pll,
struct rockchip_pll_rate_table *rate)
@@ -212,7 +230,7 @@ static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
/* wait for the pll to lock */
+ ret = rockchip_rk3036_pll_wait_lock(pll);
if (ret) {
pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
__func__);
@@ -251,7 +269,7 @@ static int rockchip_rk3036_pll_enable(struct clk_hw *hw)
writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
pll->reg_base + RK3036_PLLCON(1));
+ rockchip_rk3036_pll_wait_lock(pll);
return 0;
}