PatchTrack

From: Heiko Stuebner <heiko@...> Date: Tue, 16 Sep 2014 16:36:12 +0200

Silergy SYR827 and SYR828 regulators use the completely same i2c interface as the fan53555 regulators - only with different voltage ranges. They are used in a some Rockchip rk3288 board designs around an act8846. Therefore first add devicetree support for the fan53555 in general and then support for the Silgery variants. Tested on a rk3288 based Netxeon R89 board as cpu voltage regulator. changes since v1: - drop already applied vin-supply patch - drop wrong regulator-naming patch - add patch to generalize ramp_delay handling Heiko Stuebner (4): regulator: fan53555: use set_ramp_delay to set the ramp up slew rate dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators regulator: fan53555: add devicetree support regulator: fan53555: add support for Silergy SYR82x regulators .../devicetree/bindings/regulator/fan53555.txt | 23 +++ .../devicetree/bindings/vendor-prefixes.txt | 2 + drivers/regulator/fan53555.c | 191 ++++++++++++++++++--- 3 files changed, 193 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/fan53555.txt -- 2.0.1

Patches in this set

• [0001] regulator: fan53555: enable vin supply (raw)
• [0002] regulator: fan53555: use set_ramp_delay to set the ramp up slew rate (raw)
• [0003] dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators (raw)
• [0004] regulator: fan53555: add devicetree support (raw)
• [0005] regulator: fan53555: add support for Silergy SYR82x regulators (raw)

Statistics

• 5 individual patches
• 202 lines added
• 31 lines removed