A grep through the kernel source revealed that neither the
config-options nor the defined functions are used anywhere
in the kernel.
There was also no activity in this regard through the last kernel
releases, so it seems this situation will not change in the future.
Therefore this patch removes this seemingly dead code.
Signed-off-by: Heiko Stuebner <heiko@...>
arch/arm/mach-s3c2410/include/mach/spi.h | 11 -------
arch/arm/plat-s3c24xx/Kconfig | 20 -------------
arch/arm/plat-s3c24xx/Makefile | 6 ----
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 36 ------------------------
arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c | 38 --------------------------
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c | 36 ------------------------
6 files changed, 0 insertions(+), 147 deletions(-)
delete mode 100644 arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
delete mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
delete mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -24,15 +24,4 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
-/* Standard setup / suspend routines for SPI GPIO pins. */
-
-extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
- int enable);
-
-extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
- int enable);
-
-extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
- int enable);
-
#endif /* __ASM_ARCH_SPI_H */
@@ -98,26 +98,6 @@ config S3C2410_DMA_DEBUG
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
-# SPI default pin configuration code
-
-config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
- bool
- help
- SPI GPIO configuration code for BUS0 when connected to
- GPE11, GPE12 and GPE13.
-
-config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
- bool
- help
- SPI GPIO configuration code for BUS 1 when connected to
- GPG5, GPG6 and GPG7.
-
-config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
- bool
- help
- SPI GPIO configuration code for BUS 1 when connected to
- GPD8, GPD9 and GPD10.
-
# common code for s3c24xx based machines, such as the SMDKs.
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
@@ -37,12 +37,6 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o
-# SPI gpio central GPIO functions
-
-obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
-obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
-obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o
-
# machine common support
obj-$(CONFIG_MACH_SMDK) += common-smdk.o
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
- int enable)
-{
- if (enable) {
- s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
- s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
- s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
- s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
- s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
- } else {
- s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
- s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
- }
-}
@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
- int enable)
-{
-
- printk(KERN_INFO "%s(%d)\n", __func__, enable);
- if (enable) {
- s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
- s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
- s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
- s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
- s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
- } else {
- s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
- s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
- }
-}
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
- int enable)
-{
- if (enable) {
- s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
- s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
- s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
- s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
- s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
- } else {
- s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
- s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
- }
-}