ARM: S3C24XX: add devicetree support for smdk2416

A patch from »ARM: S3C24XX: add devicetree support for smdk2416« in state Mainline for linux-kernel

From: Heiko Stuebner <heiko@...> Date: Thu, 4 Apr 2013 22:57:54 +0200

Commit-Message

Definitions in s3c24xx.dtsi are usable for all s3c24xx SoCs, but some need to be extended with proper compatible properties, as can be seen in s3c2416.dtsi . Signed-off-by: Heiko Stuebner <heiko@...>

Patch-Comment

This patch depends on the not yet merged s3c24xx pinctrl support and the samsung-time muliplatform support. arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 173 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/s3c2416-smdk2416.dts | 72 +++++++++++++ arch/arm/boot/dts/s3c2416.dtsi | 79 ++++++++++++++ arch/arm/boot/dts/s3c24xx.dtsi | 92 ++++++++++++++++ arch/arm/mach-s3c24xx/Kconfig | 12 ++ arch/arm/mach-s3c24xx/Makefile | 1 + arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 91 ++++++++++++++++ 8 files changed, 521 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/s3c2416-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts create mode 100644 arch/arm/boot/dts/s3c2416.dtsi create mode 100644 arch/arm/boot/dts/s3c24xx.dtsi create mode 100644 arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

Statistics

  • 521 lines added
  • 0 lines removed

Changes

-------------------------- arch/arm/boot/dts/Makefile --------------------------
index d3cd880..4296353 100644
@@ -137,6 +137,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
hrefprev60.dtb \
hrefv60plus.dtb \
ccu9540.dtb
+dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
sh73a0-kzm9g.dtb \
-------------------- arch/arm/boot/dts/s3c2416-pinctrl.dtsi --------------------
new file mode 100644
index 0000000..527e319
@@ -0,0 +1,173 @@
+/*
+ * Samsung S3C2416 pinctrl settings
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+ /*
+ * Pin banks
+ */
+
+ gpa: gpa {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpb: gpb {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpc: gpc {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpd: gpd {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpe: gpe {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpf: gpf {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg: gpg {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph: gph {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpj: gpj {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpk: gpk {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpl: gpl {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpm: gpm {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /*
+ * Pin groups
+ */
+
+ uart0_data: uart0-data {
+ samsung,pins = "gph-0", "gph-1";
+ samsung,pin-function = <2>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gph-8", "gph-9";
+ samsung,pin-function = <2>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gph-2", "gph-3";
+ samsung,pin-function = <2>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gph-10", "gph-11";
+ samsung,pin-function = <2>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gph-4", "gph-5";
+ samsung,pin-function = <2>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gph-6", "gph-7";
+ samsung,pin-function = <2>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gph-6", "gph-7";
+ samsung,pin-function = <2>;
+ };
+
+ extuart_clk: extuart-clk {
+ samsung,pins = "gph-12";
+ samsung,pin-function = <2>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpe-14", "gpe-15";
+ samsung,pin-function = <2>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpe-11", "gpe-12", "gpe-13";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpe-5";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpe-6";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_bus1: sd0-bus1 {
+ samsung,pins = "gpe-7";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_bus4: sd0-bus4 {
+ samsung,pins = "gpe-8", "gpe-9", "gpe-10";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpl-8";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpl-9";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_bus1: sd1-bus1 {
+ samsung,pins = "gpl-0";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_bus4: sd1-bus4 {
+ samsung,pins = "gpl-1", "gpl-2", "gpl-3";
+ samsung,pin-function = <2>;
+ };
+};
-------------------- arch/arm/boot/dts/s3c2416-smdk2416.dts --------------------
new file mode 100644
index 0000000..ad1dd09
@@ -0,0 +1,72 @@
+/*
+ * SAMSUNG SMDK2416 board device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "s3c2416.dtsi"
+
+/ {
+ model = "SMDK2416";
+ compatible = "samsung,s3c2416";
+
+ memory {
+ reg = <0x30000000 0x4000000>;
+ };
+
+ serial@50000000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+ };
+
+ serial@50004000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+ };
+
+ serial@50008000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+ };
+
+ serial@5000C000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_data>;
+ };
+
+ watchdog@53000000 {
+ status = "okay";
+ };
+
+ rtc@57000000 {
+ status = "okay";
+ };
+
+ sdhci@4AC00000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+ <&sd0_bus1>, <&sd0_bus4>;
+ bus-width = <4>;
+ cd-gpios = <&gpf 1 0>;
+ cd-inverted;
+ status = "okay";
+ };
+
+ sdhci@4A800000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+ <&sd1_bus1>, <&sd1_bus4>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+ };
+};
------------------------ arch/arm/boot/dts/s3c2416.dtsi ------------------------
new file mode 100644
index 0000000..6809324
@@ -0,0 +1,79 @@
+/*
+ * Samsung's S3C2416 SoC device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "s3c24xx.dtsi"
+/include/ "s3c2416-pinctrl.dtsi"
+
+/ {
+ model = "Samsung S3C2416 SoC";
+ compatible = "samsung,s3c2416";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ interrupt-controller@4a000000 {
+ compatible = "samsung,s3c2416-irq";
+ };
+
+ pinctrl@56000000 {
+ compatible = "samsung,s3c2416-pinctrl";
+ };
+
+ serial@50000000 {
+ compatible = "samsung,s3c2440-uart";
+ };
+
+ serial@50004000 {
+ compatible = "samsung,s3c2440-uart";
+ };
+
+ serial@50008000 {
+ compatible = "samsung,s3c2440-uart";
+ };
+
+ serial@5000C000 {
+ compatible = "samsung,s3c2440-uart";
+ reg = <0x5000C000 0x4000>;
+ interrupts = <1 18 24 4>, <1 18 25 4>;
+ status = "disabled";
+ };
+
+ sdhci@4AC00000 {
+ compatible = "samsung,s3c6410-sdhci";
+ reg = <0x4AC00000 0x100>;
+ interrupts = <0 0 21 3>;
+ status = "disabled";
+ };
+
+ sdhci@4A800000 {
+ compatible = "samsung,s3c6410-sdhci";
+ reg = <0x4A800000 0x100>;
+ interrupts = <0 0 20 3>;
+ status = "disabled";
+ };
+
+ watchdog@53000000 {
+ interrupts = <1 9 27 3>;
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2416-rtc";
+ };
+
+ i2c@54000000 {
+ compatible = "samsung,s3c2440-i2c";
+ };
+};
------------------------ arch/arm/boot/dts/s3c24xx.dtsi ------------------------
new file mode 100644
index 0000000..92017f6
@@ -0,0 +1,92 @@
+/*
+ * Samsung's S3C24XX family device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,s3c24xx";
+ interrupt-parent = <&intc>;
+
+ aliases {
+ pinctrl0 = &pinctrl_0;
+ };
+
+ intc:interrupt-controller@4a000000 {
+ compatible = "samsung,s3c24xx-irq";
+ reg = <0x4a000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ pinctrl_0: pinctrl@56000000 {
+ reg = <0x56000000 0x1000>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,s3c2410-wakeup-eint";
+ interrupts = <0 0 0 3>,
+ <0 0 1 3>,
+ <0 0 2 3>,
+ <0 0 3 3>,
+ <0 0 4 4>,
+ <0 0 5 4>;
+ };
+ };
+
+ timer@51000000 {
+ compatible = "samsung,s3c2410-pwm";
+ reg = <0x51000000 0x1000>;
+ interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
+ #pwm-cells = <4>;
+ };
+
+ serial@50000000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50000000 0x4000>;
+ interrupts = <1 28 0 4>, <1 28 1 4>;
+ status = "disabled";
+ };
+
+ serial@50004000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ status = "disabled";
+ };
+
+ serial@50008000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50008000 0x4000>;
+ interrupts = <1 15 6 4>, <1 15 7 4>;
+ status = "disabled";
+ };
+
+ watchdog@53000000 {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x53000000 0x100>;
+ interrupts = <0 0 9 3>;
+ status = "disabled";
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2410-rtc";
+ reg = <0x57000000 0x100>;
+ interrupts = <0 0 30 3>, <0 0 8 3>;
+ status = "disabled";
+ };
+
+ i2c@54000000 {
+ compatible = "samsung,s3c2410-i2c";
+ reg = <0x54000000 0x100>;
+ interrupts = <0 0 27 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
------------------------ arch/arm/mach-s3c24xx/Kconfig -------------------------
index 0a8663c..f842e3e 100644
@@ -496,6 +496,18 @@ config MACH_SMDK2416
help
Say Y here if you are using an SMDK2416
+config MACH_S3C2416_DT
+ bool "Samsung S3C2416 machine using devicetree"
+ select CLKSRC_OF
+ select USE_OF
+ select PINCTRL
+ select PINCTRL_S3C24XX
+ help
+ Machine support for Samsung S3C2416 machines with device tree enabled.
+ Select this if a fdt blob is available for the S3C2416 SoC based board.
+ Note: This is under development and not all peripherals can be supported
+ with this machine file.
+
endif # CPU_S3C2416
if CPU_S3C2440
------------------------ arch/arm/mach-s3c24xx/Makefile ------------------------
index 6f46ecf..6de730b 100644
@@ -85,6 +85,7 @@ obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
+obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
------------------- arch/arm/mach-s3c24xx/mach-s3c2416-dt.c --------------------
new file mode 100644
index 0000000..f5c9072
@@ -0,0 +1,91 @@
+/*
+ * Samsung's S3C2416 flattened device tree enabled machine
+ *
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on mach-exynos/mach-exynos4-dt.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the S3C2416 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART0,
+ "s3c2440-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART1,
+ "s3c2440-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART2,
+ "s3c2440-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2443_PA_UART3,
+ "s3c2440-uart.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
+ "s3c-sdhci.0", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
+ "s3c-sdhci.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
+ "s3c2440-i2c.0", NULL),
+ {},
+};
+
+static void __init s3c2416_dt_map_io(void)
+{
+ s3c24xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+}
+
+static void __init s3c2416_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ s3c2416_auxdata_lookup, NULL);
+
+ s3c_pm_init();
+}
+
+static char const *s3c2416_dt_compat[] __initdata = {
+ "samsung,s3c2416",
+ "samsung,s3c2450",
+ NULL
+};
+
+DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
+ /* Maintainer: Heiko Stuebner <heiko@sntech.de> */
+ .dt_compat = s3c2416_dt_compat,
+ .map_io = s3c2416_dt_map_io,
+ .init_irq = irqchip_init,
+ .init_machine = s3c2416_dt_machine_init,
+ .init_time = clocksource_of_init,
+ .restart = s3c2416_restart,
+MACHINE_END
 
 

Recent Patches

About Us

Sed lacus. Donec lectus. Nullam pretium nibh ut turpis. Nam bibendum. In nulla tortor, elementum vel, tempor at, varius non, purus. Mauris vitae nisl nec metus placerat consectetuer.

Read More...