irqchip: s3c24xx: add devicetree support
From: Heiko Stuebner <heiko@...> Date: Sat, 16 Mar 2013 16:03:47 +0100
Commit-Message
Add the necessary code to initialize the interrupt controller thru devicetree data using the irqchip infrastructure. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
.../interrupt-controller/samsung,s3c24xx-irq.txt | 64 +++++++ drivers/irqchip/irq-s3c24xx.c | 181 ++++++++++++++++++++ 2 files changed, 245 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
Statistics
- 245 lines added
- 0 lines removed
Changes
Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
new file mode 100644
index 0000000..bfd689b
@@ -0,0 +1,64 @@
+Samsung S3C24XX Interrupt Controllers
+
+The S3C24XX SoCs contain a custom set of interrupt controllers providing a
+varying number of interrupt sources. The set consists of a main- and sub-
+controller and on newer SoCs even a second main controller.
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c24xx-irq",
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Sub-controllers as child nodes:
+ The interrupt controllers that should be referenced by device nodes are
+ represented by child nodes. Valid names are intc, subintc and intc2.
+ The interrupt values in device nodes are than mapped directly to the
+ bit-numbers of the pending register of the named interrupt controller.
+
+ Interrupts properties using sub-controller also should contain the hwirq
+ of their parent interrupt in the main controller as third interrupt-cell.
+
+Required properties:
+- interrupt-controller : Identifies the node as an interrupt controller
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2 for the main controllers and 3
+ for the sub-controller.
+
+Example:
+
+ interrupt-controller@4a000000 {
+ compatible = "samsung,s3c24xx-irq";
+ reg = <0x4a000000 0x100>;
+ interrupt-controller;
+
+ intc:intc {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ subintc:subintc {
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+
+ [...]
+
+ serial@50000000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50000000 0x4000>;
+ interrupt-parent = <&subintc>;
+ interrupts = <0 4 28>, <1 4 28>;
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2410-rtc";
+ reg = <0x57000000 0x100>;
+ interrupt-parent = <&intc>;
+ interrupts = <30 3>, <8 3>;
+ status = "disabled";
+ };
------------------------ drivers/irqchip/irq-s3c24xx.c -------------------------
index 7cba4f0..c26eb3f 100644
@@ -25,6 +25,9 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
@@ -36,6 +39,8 @@
#include <plat/regs-irqtype.h>
#include <plat/pm.h>
+#include "irqchip.h"
+
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
#define S3C_IRQTYPE_EDGE 2
@@ -1128,3 +1133,179 @@ void __init s3c2443_init_irq(void)
s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
}
#endif
+
+#ifdef CONFIG_OF
+static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct s3c_irq_intc *intc = h->host_data;
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ struct s3c_irq_data *irq_data = &intc->irqs[hw];
+
+ /* attach controller pointer to irq_data */
+ irq_data->intc = intc;
+
+ if (!parent_intc)
+ irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+ handle_edge_irq);
+
+ set_irq_flags(virq, IRQF_VALID);
+
+ return 0;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops_of_main = {
+ .map = s3c24xx_irq_map_of,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int s3c_irq_xlate_subintc(struct irq_domain *d, struct device_node *n,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ struct s3c_irq_intc *intc = d->host_data;
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ struct s3c_irq_data *irq_data = &intc->irqs[intspec[0]];
+ struct s3c_irq_data *parent_irq_data;
+
+ int irqno;
+
+ if (WARN_ON(intsize < 3))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+
+ irqno = irq_create_mapping(parent_intc->domain, intspec[2]);
+ if (irqno < 0) {
+ pr_err("irq: could not map parent interrupt\n");
+ return irqno;
+ }
+
+ irq_data->parent_irq = intspec[2];
+ parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+ parent_irq_data->sub_intc = intc;
+ parent_irq_data->sub_bits |= (1UL << intspec[0]);
+
+ irq_set_chained_handler(irqno, s3c_irq_demux);
+
+ return 0;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops_of_sub = {
+ .map = s3c24xx_irq_map_of,
+ .xlate = s3c_irq_xlate_subintc,
+};
+
+struct s3c24xx_irq_of_ctrl {
+ char *name;
+ unsigned long offset;
+ struct s3c_irq_intc **handle;
+ struct s3c_irq_intc **parent;
+ struct irq_domain_ops *ops;
+};
+
+static struct s3c24xx_irq_of_ctrl s3c24xx_ctrl[] = {
+ {
+ .name = "intc",
+ .offset = 0,
+ .handle = &main_intc,
+ .ops = &s3c24xx_irq_ops_of_main,
+ }, {
+ .name = "subintc",
+ .offset = 0x18,
+ .parent = &main_intc,
+ .ops = &s3c24xx_irq_ops_of_sub,
+ }, {
+ .name = "intc2",
+ .offset = 0x40,
+ .handle = &main_intc2,
+ .ops = &s3c24xx_irq_ops_of_main,
+ }
+};
+
+int __init s3c24xx_init_intc_of(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ struct device_node *intc_node;
+ struct s3c_irq_intc *intc;
+ struct s3c24xx_irq_of_ctrl *ctrl;
+ void __iomem *reg_base;
+ int i;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("irq-s3c24xx: could not map irq registers\n");
+ return -EINVAL;
+ }
+
+ set_handle_irq(s3c24xx_handle_irq);
+
+ for (i = 0; i < ARRAY_SIZE(s3c24xx_ctrl); i++) {
+ ctrl = &s3c24xx_ctrl[i];
+
+ intc_node = of_find_node_by_name(np, ctrl->name);
+ if (!intc_node) {
+ pr_debug("irq: no device node for %s\n",
+ ctrl->name);
+ continue;
+ }
+
+ intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+ if (!intc) {
+ of_node_put(intc_node);
+ return -ENOMEM;
+ }
+
+ pr_debug("irq: found controller %s\n", ctrl->name);
+
+ intc->irqs = kzalloc(sizeof(struct s3c_irq_data) * 32,
+ GFP_KERNEL);
+ if (!intc->irqs) {
+ kfree(intc);
+ of_node_put(intc_node);
+ return -ENOMEM;
+ }
+
+ if (ctrl->parent) {
+ intc->reg_pending = reg_base + ctrl->offset;
+ intc->reg_mask = reg_base + ctrl->offset + 0x4;
+
+ if (*(ctrl->parent)) {
+ intc->parent = *(ctrl->parent);
+ } else {
+ pr_warn("irq: parent of %s missing\n",
+ ctrl->name);
+ kfree(intc->irqs);
+ kfree(intc);
+ of_node_put(intc_node);
+ continue;
+ }
+ } else {
+ intc->reg_pending = reg_base + ctrl->offset;
+ intc->reg_mask = reg_base + ctrl->offset + 0x08;
+ intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
+ }
+
+ /* now that all the data is complete, init the irq-domain */
+ s3c24xx_clear_intc(intc);
+ intc->domain = irq_domain_add_linear(intc_node, 32,
+ ctrl->ops, intc);
+ if (!intc->domain) {
+ pr_err("irq: could not create irq-domain\n");
+ kfree(intc->irqs);
+ kfree(intc);
+ of_node_put(intc_node);
+ continue;
+ }
+
+ if (ctrl->handle)
+ *(ctrl->handle) = intc;
+ }
+
+ return 0;
+}
+IRQCHIP_DECLARE(s3c24xx_irq, "samsung,s3c24xx-irq", s3c24xx_init_intc_of);
+#endif