clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442
From: Heiko Stuebner <heiko@...> Date: Thu, 12 Dec 2013 15:31:05 +0100
Commit-Message
This driver can handle the clock controllers of the socs mentioned above, as they share a common clock tree with only small differences. The clock structure is built according to the manuals of the included SoCs and might include changes in comparison to the previous clock structure. As pll-rate-tables only the 12mhz variants are currently included. The original code was wrongly checking for 169mhz xti values [a 0 to much at the end], so the original 16mhz pll table would have never been included and its values are so obscure that I have no possibility to at least check their sane-ness. When using the formula from the manual the resulting frequency is near the table value but still slightly off. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-s3c2410.c | 428 +++++++++++++++++++++ include/dt-bindings/clock/samsung,s3c2410-clock.h | 64 +++ 3 files changed, 493 insertions(+) create mode 100644 drivers/clk/samsung/clk-s3c2410.c create mode 100644 include/dt-bindings/clock/samsung,s3c2410-clock.h
Statistics
- 493 lines added
- 0 lines removed
Changes
------------------------- drivers/clk/samsung/Makefile -------------------------
index 568683c..60748b2 100644
@@ -8,6 +8,7 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
+obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o
---------------------- drivers/clk/samsung/clk-s3c2410.c -----------------------
new file mode 100644
index 0000000..8358cad
@@ -0,0 +1,428 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2410 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/samsung,s3c2410-clock.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME 0x00
+#define MPLLCON 0x04
+#define UPLLCON 0x08
+#define CLKCON 0x0c
+#define CLKSLOW 0x10
+#define CLKDIVN 0x14
+#define CAMDIVN 0x18
+
+/* the soc types */
+enum supported_socs {
+ S3C2410,
+ S3C2440,
+ S3C2442,
+};
+
+/* list of PLLs to be registered */
+enum s3c2410_plls {
+ mpll, upll,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2410_clk_regs[] __initdata = {
+ LOCKTIME,
+ MPLLCON,
+ UPLLCON,
+ CLKCON,
+ CLKSLOW,
+ CLKDIVN,
+ CAMDIVN,
+};
+
+PNAME(fclk_p) = { "mpll", "div_slow" };
+
+struct samsung_mux_clock s3c2410_common_muxes[] __initdata = {
+ MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1),
+};
+
+static struct clk_div_table divslow_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 6 },
+ { .val = 4, .div = 8 },
+ { .val = 5, .div = 10 },
+ { .val = 6, .div = 12 },
+ { .val = 7, .div = 14 },
+ { .div = 0 },
+};
+
+struct samsung_div_clock s3c2410_common_dividers[] __initdata = {
+ DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d),
+ DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1),
+};
+
+struct samsung_gate_clock s3c2410_common_gates[] __initdata = {
+ GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0),
+ GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0),
+ GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0),
+ GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0),
+ GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0),
+ GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0),
+ GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0),
+ GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0),
+ GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0),
+ GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0),
+ GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0),
+ GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+ GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+ GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+};
+
+/* should be added _after_ the soc-specific clocks are created */
+struct samsung_clock_alias s3c2410_common_aliases[] __initdata = {
+ ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+ ALIAS(PCLK_ADC, NULL, "adc"),
+ ALIAS(PCLK_RTC, NULL, "rtc"),
+ ALIAS(PCLK_PWM, NULL, "timers"),
+ ALIAS(HCLK_LCD, NULL, "lcd"),
+ ALIAS(HCLK_USBD, NULL, "usb-device"),
+ ALIAS(HCLK_USBH, NULL, "usb-host"),
+ ALIAS(UCLK, NULL, "usb-bus-host"),
+ ALIAS(UCLK, NULL, "usb-bus-gadget"),
+ ALIAS(ARMCLK, NULL, "armclk"),
+ ALIAS(UCLK, NULL, "uclk"),
+ ALIAS(HCLK, NULL, "hclk"),
+ ALIAS(MPLL, NULL, "mpll"),
+ ALIAS(FCLK, NULL, "fclk"),
+};
+
+/* S3C2410 specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = {
+ /* sorted in descending order */
+ /* 2410A extras */
+ PLL_35XX_RATE(270000000, 127, 1, 1),
+ PLL_35XX_RATE(268000000, 126, 1, 1),
+ PLL_35XX_RATE(266000000, 125, 1, 1),
+ PLL_35XX_RATE(226000000, 105, 1, 1),
+ PLL_35XX_RATE(210000000, 132, 2, 1),
+ /* 2410 common */
+ PLL_35XX_RATE(203000000, 161, 3, 1),
+ PLL_35XX_RATE(192000000, 88, 1, 1),
+ PLL_35XX_RATE(186000000, 85, 1, 1),
+ PLL_35XX_RATE(180000000, 82, 1, 1),
+ PLL_35XX_RATE(170000000, 77, 1, 1),
+ PLL_35XX_RATE(158000000, 71, 1, 1),
+ PLL_35XX_RATE(152000000, 68, 1, 1),
+ PLL_35XX_RATE(147000000, 90, 2, 1),
+ PLL_35XX_RATE(135000000, 82, 2, 1),
+ PLL_35XX_RATE(124000000, 116, 1, 2),
+ PLL_35XX_RATE(118000000, 150, 2, 2),
+ PLL_35XX_RATE(113000000, 105, 1, 2),
+ PLL_35XX_RATE(101000000, 127, 2, 2),
+ PLL_35XX_RATE(90000000, 112, 2, 2),
+ PLL_35XX_RATE(85000000, 105, 2, 2),
+ PLL_35XX_RATE(79000000, 71, 1, 2),
+ PLL_35XX_RATE(68000000, 82, 2, 2),
+ PLL_35XX_RATE(56000000, 142, 2, 3),
+ PLL_35XX_RATE(48000000, 120, 2, 3),
+ PLL_35XX_RATE(51000000, 161, 3, 3),
+ PLL_35XX_RATE(45000000, 82, 1, 3),
+ PLL_35XX_RATE(34000000, 82, 2, 3),
+ { },
+};
+
+static struct samsung_pll_clock s3c2410_plls[] __initdata = {
+ [mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti",
+ LOCKTIME, MPLLCON, NULL),
+ [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+ LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_div_clock s3c2410_dividers[] __initdata = {
+ DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1),
+};
+
+struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = {
+ /*
+ * armclk is directly supplied by the fclk, without
+ * switching possibility like on the s3c244x below.
+ */
+ FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0),
+
+ /* uclk is fed from the unmodified upll */
+ FFACTOR(UCLK, "uclk", "upll", 1, 1, 0),
+};
+
+struct samsung_clock_alias s3c2410_aliases[] __initdata = {
+ ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"),
+ ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"),
+ ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"),
+ ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"),
+ ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"),
+ ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"),
+ ALIAS(UCLK, NULL, "clk_uart_baud1"),
+};
+
+/* S3C244x specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = {
+ /* sorted in descending order */
+ PLL_35XX_RATE(400000000, 0x5c, 1, 1),
+ PLL_35XX_RATE(390000000, 0x7a, 2, 1),
+ PLL_35XX_RATE(380000000, 0x57, 1, 1),
+ PLL_35XX_RATE(370000000, 0xb1, 4, 1),
+ PLL_35XX_RATE(360000000, 0x70, 2, 1),
+ PLL_35XX_RATE(350000000, 0xa7, 4, 1),
+ PLL_35XX_RATE(340000000, 0x4d, 1, 1),
+ PLL_35XX_RATE(330000000, 0x66, 2, 1),
+ PLL_35XX_RATE(320000000, 0x98, 4, 1),
+ PLL_35XX_RATE(310000000, 0x93, 4, 1),
+ PLL_35XX_RATE(300000000, 0x75, 3, 1),
+ PLL_35XX_RATE(240000000, 0x70, 1, 2),
+ PLL_35XX_RATE(230000000, 0x6b, 1, 2),
+ PLL_35XX_RATE(220000000, 0x66, 1, 2),
+ PLL_35XX_RATE(210000000, 0x84, 2, 2),
+ PLL_35XX_RATE(200000000, 0x5c, 1, 2),
+ PLL_35XX_RATE(190000000, 0x57, 1, 2),
+ PLL_35XX_RATE(180000000, 0x70, 2, 2),
+ PLL_35XX_RATE(170000000, 0x4d, 1, 2),
+ PLL_35XX_RATE(160000000, 0x98, 4, 2),
+ PLL_35XX_RATE(150000000, 0x75, 3, 2),
+ PLL_35XX_RATE(120000000, 0x70, 1, 3),
+ PLL_35XX_RATE(110000000, 0x66, 1, 3),
+ PLL_35XX_RATE(100000000, 0x5c, 1, 3),
+ PLL_35XX_RATE(90000000, 0x70, 2, 3),
+ PLL_35XX_RATE(80000000, 0x98, 4, 3),
+ PLL_35XX_RATE(75000000, 0x75, 3, 3),
+};
+
+static struct samsung_pll_clock s3c244x_common_plls[] __initdata = {
+ [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+ LOCKTIME, MPLLCON, NULL),
+ [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+ LOCKTIME, UPLLCON, NULL),
+};
+
+PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" };
+PNAME(armclk_p) = { "fclk", "hclk" };
+
+struct samsung_mux_clock s3c244x_common_muxes[] __initdata = {
+ MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2),
+ MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1),
+};
+
+struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = {
+ FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0),
+ FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+static struct clk_div_table div_hclk_4_d[] = {
+ { .val = 0, .div = 4 },
+ { .val = 1, .div = 8 },
+};
+
+static struct clk_div_table div_hclk_3_d[] = {
+ { .val = 0, .div = 3 },
+ { .val = 1, .div = 6 },
+};
+
+struct samsung_div_clock s3c244x_common_dividers[] __initdata = {
+ DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1),
+ DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1),
+ DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d),
+ DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d),
+ DIV(0, "div_cam", "upll", CAMDIVN, 0, 3),
+};
+
+struct samsung_gate_clock s3c244x_common_gates[] __initdata = {
+ GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c244x_common_aliases[] __initdata = {
+ ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+ ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+ ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+ ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+ ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+ ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+ ALIAS(HCLK_CAM, NULL, "camif"),
+ ALIAS(CAMIF, NULL, "camif-upll"),
+};
+
+/* S3C2440 specific clocks */
+
+PNAME(s3c2440_camif_p) = { "upll", "ff_cam" };
+
+struct samsung_mux_clock s3c2440_muxes[] __initdata = {
+ MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1),
+};
+
+struct samsung_gate_clock s3c2440_gates[] __initdata = {
+ GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0),
+};
+
+/* S3C2442 specific clocks */
+
+struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = {
+ FFACTOR(0, "upll_3", "upll", 1, 3, 0),
+};
+
+PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" };
+
+struct samsung_mux_clock s3c2442_muxes[] __initdata = {
+ MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = {
+ FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2410_common_clk_register_fixed_ext(unsigned long xti_f)
+{
+ struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+ s3c2410_common_frate_clks[0].fixed_rate = xti_f;
+ samsung_clk_register_fixed_rate(s3c2410_common_frate_clks,
+ ARRAY_SIZE(s3c2410_common_frate_clks));
+
+ samsung_clk_register_alias(&xti_alias, 1);
+}
+
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base)
+{
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ }
+
+ samsung_clk_init(np, reg_base, NR_CLKS,
+ s3c2410_clk_regs, ARRAY_SIZE(s3c2410_clk_regs), NULL, 0);
+
+ /* Register external clocks only in non-dt cases */
+ if (!np)
+ s3c2410_common_clk_register_fixed_ext(xti_f);
+
+ if (current_soc == 2410) {
+ if (_get_rate("xti") == 12 * MHZ) {
+ s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl;
+ s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl;
+ }
+
+ /* Register PLLs. */
+ samsung_clk_register_pll(s3c2410_plls,
+ ARRAY_SIZE(s3c2410_plls), reg_base);
+
+ } else { /* S3C2440, S3C2442 */
+ if (_get_rate("xti") == 12 * MHZ) {
+ /*
+ * plls follow different calculation schemes, with the
+ * upll following the same scheme as the s3c2410 plls
+ */
+ s3c244x_common_plls[mpll].rate_table =
+ pll_s3c244x_12mhz_tbl;
+ s3c244x_common_plls[upll].rate_table =
+ pll_s3c2410_12mhz_tbl;
+ }
+
+ /* Register PLLs. */
+ samsung_clk_register_pll(s3c244x_common_plls,
+ ARRAY_SIZE(s3c244x_common_plls), reg_base);
+ }
+
+ /* Register common internal clocks. */
+ samsung_clk_register_mux(s3c2410_common_muxes,
+ ARRAY_SIZE(s3c2410_common_muxes));
+ samsung_clk_register_div(s3c2410_common_dividers,
+ ARRAY_SIZE(s3c2410_common_dividers));
+ samsung_clk_register_gate(s3c2410_common_gates,
+ ARRAY_SIZE(s3c2410_common_gates));
+
+ if (current_soc == S3C2440 || current_soc == S3C2442) {
+ samsung_clk_register_div(s3c244x_common_dividers,
+ ARRAY_SIZE(s3c244x_common_dividers));
+ samsung_clk_register_gate(s3c244x_common_gates,
+ ARRAY_SIZE(s3c244x_common_gates));
+ samsung_clk_register_mux(s3c244x_common_muxes,
+ ARRAY_SIZE(s3c244x_common_muxes));
+ samsung_clk_register_fixed_factor(s3c244x_common_ffactor,
+ ARRAY_SIZE(s3c244x_common_ffactor));
+ }
+
+ /* Register SoC-specific clocks. */
+ switch (current_soc) {
+ case S3C2410:
+ samsung_clk_register_div(s3c2410_dividers,
+ ARRAY_SIZE(s3c2410_dividers));
+ samsung_clk_register_fixed_factor(s3c2410_ffactor,
+ ARRAY_SIZE(s3c2410_ffactor));
+ samsung_clk_register_alias(s3c2410_aliases,
+ ARRAY_SIZE(s3c2410_common_aliases));
+ break;
+ case S3C2440:
+ samsung_clk_register_mux(s3c2440_muxes,
+ ARRAY_SIZE(s3c2440_muxes));
+ samsung_clk_register_gate(s3c2440_gates,
+ ARRAY_SIZE(s3c2440_gates));
+ break;
+ case S3C2442:
+ samsung_clk_register_mux(s3c2442_muxes,
+ ARRAY_SIZE(s3c2442_muxes));
+ samsung_clk_register_fixed_factor(s3c2442_ffactor,
+ ARRAY_SIZE(s3c2442_ffactor));
+ break;
+ }
+
+ /*
+ * Register common aliases at the end, as some of the aliased clocks
+ * are SoC specific.
+ */
+ samsung_clk_register_alias(s3c2410_common_aliases,
+ ARRAY_SIZE(s3c2410_common_aliases));
+
+ if (current_soc == S3C2440 || current_soc == S3C2442) {
+ samsung_clk_register_alias(s3c244x_common_aliases,
+ ARRAY_SIZE(s3c244x_common_aliases));
+ }
+}
+
+static void __init s3c2410_clk_init(struct device_node *np)
+{
+ s3c2410_common_clk_init(np, 0, S3C2410, 0);
+}
+CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init);
+
+static void __init s3c2440_clk_init(struct device_node *np)
+{
+ s3c2410_common_clk_init(np, 0, S3C2440, 0);
+}
+CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init);
+
+static void __init s3c2442_clk_init(struct device_node *np)
+{
+ s3c2410_common_clk_init(np, 0, S3C2442, 0);
+}
+CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init);
-------------- include/dt-bindings/clock/samsung,s3c2410-clock.h ---------------
new file mode 100644
index 0000000..66c278f
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2410 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+
+#define MPLL 1
+#define UPLL 2
+#define FCLK 3
+#define HCLK 4
+#define PCLK 5
+#define UCLK 6
+#define ARMCLK 7
+
+#define XTI 8
+
+/* pclk-gates */
+#define PCLK_UART0 16
+#define PCLK_UART1 17
+#define PCLK_UART2 18
+#define PCLK_I2C 19
+#define PCLK_SDI 20
+#define PCLK_SPI 21
+#define PCLK_ADC 22
+#define PCLK_AC97 23
+#define PCLK_I2S 24
+#define PCLK_PWM 25
+#define PCLK_RTC 26
+#define PCLK_GPIO 27
+
+
+/* hclk-gates */
+#define HCLK_LCD 32
+#define HCLK_USBH 33
+#define HCLK_USBD 34
+#define HCLK_NAND 35
+#define HCLK_CAM 36
+
+
+#define CAMIF 40
+
+
+/* Total number of clocks. */
+#define NR_CLKS (CAMIF + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */