pinctrl: rockchip: do not require 2nd register area
From: Heiko Stuebner <heiko@...> Date: Sat, 26 Apr 2014 00:50:37 +0200
Commit-Message
Deprecate secondary register area for rk3188 pulls. Instead use big enough initial mapping of grf registers to catch all. The now deprecated register is still supported though. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
.../devicetree/bindings/pinctrl/rockchip,pinctrl.txt | 2 ++ drivers/pinctrl/pinctrl-rockchip.c | 15 ++++++++++++--- 2 files changed, 14 insertions(+), 3 deletions(-)
Statistics
- 14 lines added
- 3 lines removed
Changes
-------- Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt --------
index f378d34..78dafc9 100644
@@ -22,6 +22,8 @@ Required properties for iomux controller:
- compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
"rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
- reg: first element is the general register space of the iomux controller
+ It should be large enough to contain also separate pull registers.
+ Deprecated:
second element is the separate pull register space of the rk3188
Required properties for gpio sub nodes:
---------------------- drivers/pinctrl/pinctrl-rockchip.c ----------------------
index 2e198a4..ab71de8 100644
@@ -160,6 +160,7 @@ struct rockchip_pmx_func {
struct rockchip_pinctrl {
void __iomem *reg_base;
+ int reg_size;
void __iomem *reg_pull;
struct device *dev;
struct rockchip_pin_ctrl *ctrl;
@@ -416,6 +417,7 @@ static void rk2928_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
*bit = pin_num % RK2928_PULL_PINS_PER_REG;
};
+#define RK3188_PULL_OFFSET 0x164
#define RK3188_PULL_BITS_PER_PIN 2
#define RK3188_PULL_PINS_PER_REG 8
#define RK3188_PULL_BANK_STRIDE 16
@@ -432,7 +434,10 @@ static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
*bit *= RK3188_PULL_BITS_PER_PIN;
} else {
+ *reg = info->reg_pull ? info->reg_pull
+ : info->reg_base + RK3188_PULL_OFFSET;
+ /* correct the offset, as it is the 2nd pull register */
+ *reg -= 4;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
@@ -1427,6 +1432,7 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
*/
if (of_device_is_compatible(bank->of_node,
"rockchip,rk3188-gpio-bank0")) {
+
bank->bank_type = RK3188_BANK0;
if (of_address_to_resource(bank->of_node, 1, &res)) {
@@ -1525,8 +1531,11 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
if (IS_ERR(info->reg_base))
return PTR_ERR(info->reg_base);
+ /* to check for the old dt-bindings */
+ info->reg_size = resource_size(res);
+
+ /* Honor the old binding, with pull registers as 2nd resource */
+ if (ctrl->type == RK3188 && info->reg_size < 0x200) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
info->reg_pull = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(info->reg_pull))