net: stmmac: dwmac-rk: abstract access to mac settings in GRF

A patch from »net: stmmac: dwmac-rk: add support for rk3368« in state Mainline for linux-kernel

From: Heiko Stuebner <heiko@...> Date: Wed, 17 Jun 2015 23:54:45 +0200

Commit-Message

The mac settings like RGMII/RMII, speeds etc are done in the so called "General Register Files", contain numerous other settings as well and always seem to change between Rockchip SoCs. Therefore abstract the register accesses into a per-soc ops struct to make this reusable on other Rockchip SoCs. Signed-off-by: Heiko Stuebner <heiko@...>

Patch-Comment

drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 116 ++++++++++++++++--------- 1 file changed, 75 insertions(+), 41 deletions(-)

Statistics

  • 75 lines added
  • 41 lines removed

Changes

---------------- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c ----------------
index 5dafebb..65afca6 100644
@@ -33,10 +33,20 @@
#include "stmmac_platform.h"
+struct rk_priv_data;
+struct rk_gmac_ops {
+ void (*set_to_rgmii)(struct rk_priv_data *bsp_priv,
+ int tx_delay, int rx_delay);
+ void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
+ void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+ void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+};
+
struct rk_priv_data {
struct platform_device *pdev;
int phy_iface;
struct regulator *regulator;
+ struct rk_gmac_ops *ops;
bool clk_enabled;
bool clock_input;
@@ -66,30 +76,32 @@ struct rk_priv_data {
#define RK3288_GRF_SOC_CON3 0x0250
/*RK3288_GRF_SOC_CON1*/
-#define GMAC_PHY_INTF_SEL_RGMII (GRF_BIT(6) | GRF_CLR_BIT(7) | GRF_CLR_BIT(8))
-#define GMAC_PHY_INTF_SEL_RMII (GRF_CLR_BIT(6) | GRF_CLR_BIT(7) | GRF_BIT(8))
-#define GMAC_FLOW_CTRL GRF_BIT(9)
-#define GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(9)
-#define GMAC_SPEED_10M GRF_CLR_BIT(10)
-#define GMAC_SPEED_100M GRF_BIT(10)
-#define GMAC_RMII_CLK_25M GRF_BIT(11)
-#define GMAC_RMII_CLK_2_5M GRF_CLR_BIT(11)
-#define GMAC_CLK_125M (GRF_CLR_BIT(12) | GRF_CLR_BIT(13))
-#define GMAC_CLK_25M (GRF_BIT(12) | GRF_BIT(13))
-#define GMAC_CLK_2_5M (GRF_CLR_BIT(12) | GRF_BIT(13))
-#define GMAC_RMII_MODE GRF_BIT(14)
-#define GMAC_RMII_MODE_CLR GRF_CLR_BIT(14)
+#define RK3288_GMAC_PHY_INTF_SEL_RGMII (GRF_BIT(6) | GRF_CLR_BIT(7) | \
+ GRF_CLR_BIT(8))
+#define RK3288_GMAC_PHY_INTF_SEL_RMII (GRF_CLR_BIT(6) | GRF_CLR_BIT(7) | \
+ GRF_BIT(8))
+#define RK3288_GMAC_FLOW_CTRL GRF_BIT(9)
+#define RK3288_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(9)
+#define RK3288_GMAC_SPEED_10M GRF_CLR_BIT(10)
+#define RK3288_GMAC_SPEED_100M GRF_BIT(10)
+#define RK3288_GMAC_RMII_CLK_25M GRF_BIT(11)
+#define RK3288_GMAC_RMII_CLK_2_5M GRF_CLR_BIT(11)
+#define RK3288_GMAC_CLK_125M (GRF_CLR_BIT(12) | GRF_CLR_BIT(13))
+#define RK3288_GMAC_CLK_25M (GRF_BIT(12) | GRF_BIT(13))
+#define RK3288_GMAC_CLK_2_5M (GRF_CLR_BIT(12) | GRF_BIT(13))
+#define RK3288_GMAC_RMII_MODE GRF_BIT(14)
+#define RK3288_GMAC_RMII_MODE_CLR GRF_CLR_BIT(14)
/*RK3288_GRF_SOC_CON3*/
-#define GMAC_TXCLK_DLY_ENABLE GRF_BIT(14)
-#define GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(14)
-#define GMAC_RXCLK_DLY_ENABLE GRF_BIT(15)
-#define GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(15)
-#define GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7)
-#define GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
-
-static void set_to_rgmii(struct rk_priv_data *bsp_priv,
- int tx_delay, int rx_delay)
+#define RK3288_GMAC_TXCLK_DLY_ENABLE GRF_BIT(14)
+#define RK3288_GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(14)
+#define RK3288_GMAC_RXCLK_DLY_ENABLE GRF_BIT(15)
+#define RK3288_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(15)
+#define RK3288_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7)
+#define RK3288_GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
+
+static void rk3288_set_to_rgmii(struct rk_priv_data *bsp_priv,
+ int tx_delay, int rx_delay)
{
struct device *dev = &bsp_priv->pdev->dev;
@@ -99,14 +111,16 @@ static void set_to_rgmii(struct rk_priv_data *bsp_priv,
}
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_PHY_INTF_SEL_RGMII | GMAC_RMII_MODE_CLR);
+ RK3288_GMAC_PHY_INTF_SEL_RGMII |
+ RK3288_GMAC_RMII_MODE_CLR);
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
- GMAC_RXCLK_DLY_ENABLE | GMAC_TXCLK_DLY_ENABLE |
- GMAC_CLK_RX_DL_CFG(rx_delay) |
- GMAC_CLK_TX_DL_CFG(tx_delay));
+ RK3288_GMAC_RXCLK_DLY_ENABLE |
+ RK3288_GMAC_TXCLK_DLY_ENABLE |
+ RK3288_GMAC_CLK_RX_DL_CFG(rx_delay) |
+ RK3288_GMAC_CLK_TX_DL_CFG(tx_delay));
}
-static void set_to_rmii(struct rk_priv_data *bsp_priv)
+static void rk3288_set_to_rmii(struct rk_priv_data *bsp_priv)
{
struct device *dev = &bsp_priv->pdev->dev;
@@ -116,10 +130,10 @@ static void set_to_rmii(struct rk_priv_data *bsp_priv)
}
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_PHY_INTF_SEL_RMII | GMAC_RMII_MODE);
+ RK3288_GMAC_PHY_INTF_SEL_RMII | RK3288_GMAC_RMII_MODE);
}
-static void set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+static void rk3288_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
{
struct device *dev = &bsp_priv->pdev->dev;
@@ -129,16 +143,19 @@ static void set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
}
if (speed == 10)
- regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_2_5M);
+ regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+ RK3288_GMAC_CLK_2_5M);
else if (speed == 100)
- regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_25M);
+ regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+ RK3288_GMAC_CLK_25M);
else if (speed == 1000)
- regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_125M);
+ regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+ RK3288_GMAC_CLK_125M);
else
dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
}
-static void set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+static void rk3288_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
{
struct device *dev = &bsp_priv->pdev->dev;
@@ -149,15 +166,24 @@ static void set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
if (speed == 10) {
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_RMII_CLK_2_5M | GMAC_SPEED_10M);
+ RK3288_GMAC_RMII_CLK_2_5M |
+ RK3288_GMAC_SPEED_10M);
} else if (speed == 100) {
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_RMII_CLK_25M | GMAC_SPEED_100M);
+ RK3288_GMAC_RMII_CLK_25M |
+ RK3288_GMAC_SPEED_100M);
} else {
dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
}
}
+struct rk_gmac_ops rk3288_ops = {
+ .set_to_rgmii = rk3288_set_to_rgmii,
+ .set_to_rmii = rk3288_set_to_rmii,
+ .set_rgmii_speed = rk3288_set_rgmii_speed,
+ .set_rmii_speed = rk3288_set_rmii_speed,
+};
+
static int gmac_clk_init(struct rk_priv_data *bsp_priv)
{
struct device *dev = &bsp_priv->pdev->dev;
@@ -309,7 +335,8 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
return 0;
}
-static void *rk_gmac_setup(struct platform_device *pdev)
+static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
+ struct rk_gmac_ops *ops)
{
struct rk_priv_data *bsp_priv;
struct device *dev = &pdev->dev;
@@ -322,6 +349,7 @@ static void *rk_gmac_setup(struct platform_device *pdev)
return ERR_PTR(-ENOMEM);
bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
+ bsp_priv->ops = ops;
bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(bsp_priv->regulator)) {
@@ -375,10 +403,11 @@ static void *rk_gmac_setup(struct platform_device *pdev)
/*rmii or rgmii*/
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
dev_info(dev, "init for RGMII\n");
- set_to_rgmii(bsp_priv, bsp_priv->tx_delay, bsp_priv->rx_delay);
+ bsp_priv->ops->set_to_rgmii(bsp_priv, bsp_priv->tx_delay,
+ bsp_priv->rx_delay);
} else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
dev_info(dev, "init for RMII\n");
- set_to_rmii(bsp_priv);
+ bsp_priv->ops->set_to_rmii(bsp_priv);
} else {
dev_err(dev, "NO interface defined!\n");
}
@@ -388,6 +417,11 @@ static void *rk_gmac_setup(struct platform_device *pdev)
return bsp_priv;
}
+static void *rk3288_gmac_setup(struct platform_device *pdev)
+{
+ return rk_gmac_setup(pdev, &rk3288_ops);
+}
+
static int rk_gmac_init(struct platform_device *pdev, void *priv)
{
struct rk_priv_data *bsp_priv = priv;
@@ -418,9 +452,9 @@ static void rk_fix_speed(void *priv, unsigned int speed)
struct device *dev = &bsp_priv->pdev->dev;
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII)
- set_rgmii_speed(bsp_priv, speed);
+ bsp_priv->ops->set_rgmii_speed(bsp_priv, speed);
else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
- set_rmii_speed(bsp_priv, speed);
+ bsp_priv->ops->set_rmii_speed(bsp_priv, speed);
else
dev_err(dev, "unsupported interface %d", bsp_priv->phy_iface);
}
@@ -428,7 +462,7 @@ static void rk_fix_speed(void *priv, unsigned int speed)
static const struct stmmac_of_data rk3288_gmac_data = {
.has_gmac = 1,
.fix_mac_speed = rk_fix_speed,
- .setup = rk_gmac_setup,
+ .setup = rk3288_gmac_setup,
.init = rk_gmac_init,
.exit = rk_gmac_exit,
};
 
 

Recent Patches

About Us

Sed lacus. Donec lectus. Nullam pretium nibh ut turpis. Nam bibendum. In nulla tortor, elementum vel, tempor at, varius non, purus. Mauris vitae nisl nec metus placerat consectetuer.

Read More...