arm64: dts: rockchip: add rk3328 display nodes
From: Heiko Stuebner <heiko@...> Date: Mon, 11 Dec 2017 02:02:01 +0100
Commit-Message
Add the chain of display nodes from the core display-subsystem through the one vop to the dw-hdmi output. Signed-off-by: Heiko Stuebner <heiko@...> Tested-by: Robin Murphy <robin.murphy@...> changes in v3: - drop reg from hdmi-in-port changes in v2: - remove trailing 0 from vop irq
Patch-Comment
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 53 ++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
Statistics
- 53 lines added
- 0 lines removed
Changes
------------------- arch/arm64/boot/dts/rockchip/rk3328.dtsi -------------------
index beebab74ce17..6b480d723fca 100644
@@ -151,6 +151,11 @@
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -605,6 +610,28 @@
status = "disabled";
};
+ vop: vop@ff370000 {
+ compatible = "rockchip,rk3328-vop";
+ reg = <0x0 0xff370000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vop_mmu>;
+ status = "disabled";
+
+ vop_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vop_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop>;
+ };
+ };
+ };
+
vop_mmu: iommu@ff373f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
@@ -616,6 +643,32 @@
status = "disabled";
};
+ hdmi: hdmi@ff3c0000 {
+ compatible = "rockchip,rk3328-dw-hdmi";
+ reg = <0x0 0xff3c0000 0x0 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>,
+ <&cru SCLK_HDMI_SFC>;
+ clock-names = "iahb",
+ "isfr";
+ phys = <&hdmiphy>;
+ phy-names = "hdmi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+ };
+ };
+
hdmiphy: phy@ff430000 {
compatible = "rockchip,rk3328-hdmi-phy";
reg = <0x0 0xff430000 0x0 0x10000>;