ARM: dts: rockchip: add Pinky board
From: Heiko Stuebner <heiko@...> Date: Tue, 7 Jul 2015 20:09:34 +0200
Commit-Message
While pinky was one of the earlier development models, is on the list of endangered species today and nearly extinct, I want to keep mine around for the foreseeable future after spending all the time making a nice hole into the base below the dut-connector. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
Documentation/devicetree/bindings/arm/rockchip.txt | 5 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/rk3288-veyron-pinky.dts | 128 +++++++++++++++++++++ 3 files changed, 135 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rk3288-veyron-pinky.dts
Statistics
- 135 lines added
- 1 lines removed
Changes
-------------- Documentation/devicetree/bindings/arm/rockchip.txt --------------
index 1b2b572..6de18bd2 100644
@@ -33,3 +33,8 @@ Rockchip platforms device tree bindings
"google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
+
+- Google Pinky (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+ "google,veyron", "rockchip,rk3288";
\ No newline at end of file
-------------------------- arch/arm/boot/dts/Makefile --------------------------
index 2e545a3..4993b3b 100644
@@ -489,7 +489,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
+ rk3288-veyron-jerry.dtb \
+ rk3288-veyron-pinky.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += \
s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += \
------------------ arch/arm/boot/dts/rk3288-veyron-pinky.dts -------------------
new file mode 100644
index 0000000..25eb4b0
@@ -0,0 +1,128 @@
+/*
+ * Google Veyron Pinky Rev 2 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+ model = "Google Pinky";
+ compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+ "google,veyron", "rockchip,rk3288";
+
+ /delete-node/emmc-pwrseq;
+};
+
+&emmc {
+ /*
+ * Use a pullup instead of a drive since the output is 3.3V and
+ * really should be 1.8V (oops). The external pulldown will help
+ * bring the voltage down if we only drive with a pullup here.
+ * Therefore disable the powerseq (and actual reset) for pinky.
+ */
+ /delete-property/mmc-pwrseq;
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
+};
+
+&gpio_keys {
+ pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
+
+ power {
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* Touchpad connector */
+&i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+};
+
+&pinctrl {
+ buttons {
+ pwr_key_h: pwr-key-h {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_wp_gpio: sdmmc-wp-gpio {
+ rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&rk808 {
+ regulators {
+ vcc18_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_wp_gpio &sdmmc_bus4>;
+ wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+};
+
+&tsadc {
+ /* Some connection is flaky making the tsadc hang the system */
+ status = "disabled";
+};