drm/panel: add panel driver for Xinpeng XPP055C272 panels
From: Heiko Stuebner <heiko.stuebner@...> Date: Fri, 16 Aug 2019 05:46:19 +0200
Commit-Message
Base on the somewhat similar Rocktech driver but adapted for panel-specific init of the XPP055C272. Signed-off-by: Heiko Stuebner <heiko.stuebner@...>
Patch-Comment
drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-xinpeng-xpp055c272.c | 433 ++++++++++++++++++ 3 files changed, 444 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
Statistics
- 444 lines added
- 0 lines removed
Changes
------------------------ drivers/gpu/drm/panel/Kconfig -------------------------
index f152bc4eeb53..fb1ded47677e 100644
@@ -355,4 +355,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
help
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
+
+config DRM_PANEL_XINPENG_XPP055C272
+ tristate "Xinpeng XPP055C272 panel driver"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the Xinpeng
+ XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
+ system interfaces.
endmenu
------------------------ drivers/gpu/drm/panel/Makefile ------------------------
index b6cd39fe0f20..71d7722146a7 100644
@@ -38,3 +38,4 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
--------------- drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c ---------------
new file mode 100644
index 000000000000..9c5fbf1879c3
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xinpeng xpp055c272 5.5" MIPI-DSI panel driver
+ * Copyright (C) 2019 Theobroma Systems Design und Consulting GmbH
+ *
+ * based on
+ *
+ * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
+ * Copyright (C) Purism SPC 2019
+ */
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <linux/backlight.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <video/display_timing.h>
+#include <video/mipi_display.h>
+
+#define DRV_NAME "panel-xinpeng-xpp055c272"
+
+/* Manufacturer specific Commands send via DSI */
+#define XPP055C272_CMD_ALL_PIXEL_OFF 0x22
+#define XPP055C272_CMD_ALL_PIXEL_ON 0x23
+#define XPP055C272_CMD_SETDISP 0xb2
+#define XPP055C272_CMD_SETRGBIF 0xb3
+#define XPP055C272_CMD_SETCYC 0xb4
+#define XPP055C272_CMD_SETBGP 0xb5
+#define XPP055C272_CMD_SETVCOM 0xb6
+#define XPP055C272_CMD_SETOTP 0xb7
+#define XPP055C272_CMD_SETPOWER_EXT 0xb8
+#define XPP055C272_CMD_SETEXTC 0xb9
+#define XPP055C272_CMD_SETMIPI 0xbA
+#define XPP055C272_CMD_SETVDC 0xbc
+#define XPP055C272_CMD_SETPCR 0xbf
+#define XPP055C272_CMD_SETSCR 0xc0
+#define XPP055C272_CMD_SETPOWER 0xc1
+#define XPP055C272_CMD_SETECO 0xc6
+#define XPP055C272_CMD_SETPANEL 0xcc
+#define XPP055C272_CMD_SETGAMMA 0xe0
+#define XPP055C272_CMD_SETEQ 0xe3
+#define XPP055C272_CMD_SETGIP1 0xe9
+#define XPP055C272_CMD_SETGIP2 0xea
+
+struct xpp055c272 {
+ struct device *dev;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+ struct backlight_device *backlight;
+ struct regulator *vci;
+ struct regulator *iovcc;
+ bool prepared;
+ bool enabled;
+};
+
+static inline struct xpp055c272 *panel_to_xpp055c272(struct drm_panel *panel)
+{
+ return container_of(panel, struct xpp055c272, panel);
+}
+
+#define dsi_generic_write_seq(dsi, cmd, seq...) do { \
+ static const u8 d[] = { seq }; \
+ int ret; \
+ ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static int xpp055c272_init_sequence(struct xpp055c272 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ struct device *dev = ctx->dev;
+ int ret;
+
+ /*
+ * Init sequence was supplied by the panel vendor without much
+ * documentation.
+ */
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETMIPI,
+ 0x33, 0x81, 0x05, 0xf9, 0x0e, 0x0e, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x25,
+ 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, 0x4f, 0x01,
+ 0x00, 0x00, 0x37);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER_EXT, 0x25);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPCR, 0x02, 0x11, 0x00);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETRGBIF,
+ 0x0c, 0x10, 0x0a, 0x50, 0x03, 0xff, 0x00, 0x00,
+ 0x00, 0x00);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETSCR,
+ 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
+ 0x00);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVDC, 0x46);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPANEL, 0x0b);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETCYC, 0x80);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETDISP, 0xc8, 0x12, 0x30);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEQ,
+ 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
+ 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER,
+ 0x53, 0x00, 0x1e, 0x1e, 0x77, 0xe1, 0xcc, 0xdd,
+ 0x67, 0x77, 0x33, 0x33);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETECO, 0x00, 0x00, 0xff,
+ 0xff, 0x01, 0xff);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETBGP, 0x09, 0x09);
+ msleep(20);
+
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVCOM, 0x87, 0x95);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP1,
+ 0xc2, 0x10, 0x05, 0x05, 0x10, 0x05, 0xa0, 0x12,
+ 0x31, 0x23, 0x3f, 0x81, 0x0a, 0xa0, 0x37, 0x18,
+ 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x80,
+ 0x01, 0x00, 0x00, 0x00, 0x48, 0xf8, 0x86, 0x42,
+ 0x08, 0x88, 0x88, 0x80, 0x88, 0x88, 0x88, 0x58,
+ 0xf8, 0x87, 0x53, 0x18, 0x88, 0x88, 0x81, 0x88,
+ 0x88, 0x88, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP2,
+ 0x00, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x1f, 0x88, 0x81, 0x35,
+ 0x78, 0x88, 0x88, 0x85, 0x88, 0x88, 0x88, 0x0f,
+ 0x88, 0x80, 0x24, 0x68, 0x88, 0x88, 0x84, 0x88,
+ 0x88, 0x88, 0x23, 0x10, 0x00, 0x00, 0x1c, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x05,
+ 0xa0, 0x00, 0x00, 0x00, 0x00);
+ dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGAMMA,
+ 0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38, 0x36,
+ 0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13, 0x11,
+ 0x18, 0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38,
+ 0x36, 0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13,
+ 0x11, 0x18);
+
+ msleep(60);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+
+ /* T9: 120ms */
+ msleep(120);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret)
+ return ret;
+
+ msleep(50);
+
+ DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
+ return 0;
+}
+
+static int xpp055c272_unprepare(struct drm_panel *panel)
+{
+ struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ if (!ctx->prepared)
+ return 0;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
+ ret);
+
+ mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
+ ret);
+ return ret;
+ }
+
+ regulator_disable(ctx->iovcc);
+ regulator_disable(ctx->vci);
+
+ ctx->prepared = false;
+
+ return 0;
+}
+
+static int xpp055c272_prepare(struct drm_panel *panel)
+{
+ struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+ ret = regulator_enable(ctx->vci);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev,
+ "Failed to enable vci supply: %d\n", ret);
+ return ret;
+ }
+ ret = regulator_enable(ctx->iovcc);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev,
+ "Failed to enable iovcc supply: %d\n", ret);
+ goto disable_vci;
+ }
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ /* T6: 10us */
+ usleep_range(10, 20);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+ /* T8: 20ms */
+ msleep(20);
+
+ ret = xpp055c272_init_sequence(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
+ ret);
+ goto disable_iovcc;
+ }
+
+ ctx->prepared = true;
+
+ return 0;
+
+disable_iovcc:
+ regulator_disable(ctx->iovcc);
+disable_vci:
+ regulator_disable(ctx->vci);
+ return ret;
+}
+
+static int xpp055c272_enable(struct drm_panel *panel)
+{
+ struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
+ int ret;
+
+ if (ctx->enabled)
+ return 0;
+
+ ret = backlight_enable(ctx->backlight);
+ if (ret) {
+ DRM_DEV_ERROR(ctx->dev,
+ "Failed to enable backlight %d\n", ret);
+ return ret;
+ }
+
+ ctx->enabled = true;
+
+ return 0;
+}
+
+static int xpp055c272_disable(struct drm_panel *panel)
+{
+ struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
+
+ if (!ctx->enabled)
+ return 0;
+
+ backlight_disable(ctx->backlight);
+
+ ctx->enabled = false;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 40,
+ .hsync_end = 720 + 40 + 10,
+ .htotal = 720 + 40 + 10 + 40,
+ .vdisplay = 1280,
+ .vsync_start = 1280 + 22,
+ .vsync_end = 1280 + 22 + 4,
+ .vtotal = 1280 + 22 + 4 + 11,
+ .vrefresh = 60,
+ .clock = 64000,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 68,
+ .height_mm = 121,
+};
+
+static int xpp055c272_get_modes(struct drm_panel *panel)
+{
+ struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &default_mode);
+ if (!mode) {
+ DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ panel->connector->display_info.width_mm = mode->width_mm;
+ panel->connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(panel->connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs xpp055c272_funcs = {
+ .disable = xpp055c272_disable,
+ .unprepare = xpp055c272_unprepare,
+ .prepare = xpp055c272_prepare,
+ .enable = xpp055c272_enable,
+ .get_modes = xpp055c272_get_modes,
+};
+
+static int xpp055c272_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct xpp055c272 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
+
+ ctx->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(ctx->backlight))
+ return PTR_ERR(ctx->backlight);
+
+ ctx->vci = devm_regulator_get(dev, "vci");
+ if (IS_ERR(ctx->vci)) {
+ ret = PTR_ERR(ctx->vci);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev,
+ "Failed to request vci regulator: %d\n",
+ ret);
+ return ret;
+ }
+ ctx->iovcc = devm_regulator_get(dev, "iovcc");
+ if (IS_ERR(ctx->iovcc)) {
+ ret = PTR_ERR(ctx->iovcc);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev,
+ "Failed to request iovcc regulator: %d\n",
+ ret);
+ return ret;
+ }
+
+ drm_panel_init(&ctx->panel, &dsi->dev, &xpp055c272_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void xpp055c272_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = drm_panel_unprepare(&ctx->panel);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
+ ret);
+
+ ret = drm_panel_disable(&ctx->panel);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
+ ret);
+}
+
+static int xpp055c272_remove(struct mipi_dsi_device *dsi)
+{
+ struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ xpp055c272_shutdown(dsi);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
+ ret);
+
+ drm_panel_remove(&ctx->panel);
+
+ return 0;
+}
+
+static const struct of_device_id xpp055c272_of_match[] = {
+ { .compatible = "xinpeng,xpp055c272" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, xpp055c272_of_match);
+
+static struct mipi_dsi_driver xpp055c272_driver = {
+ .probe = xpp055c272_probe,
+ .remove = xpp055c272_remove,
+ .shutdown = xpp055c272_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = xpp055c272_of_match,
+ },
+};
+module_mipi_dsi_driver(xpp055c272_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
+MODULE_DESCRIPTION("DRM driver for Xinpeng xpp055c272 MIPI DSI panel");
+MODULE_LICENSE("GPL v2");