dt-bindings: Add Innolux P097PFG panel bindings
From: huang lin <hl@...> Date: Wed, 14 Mar 2018 17:12:16 +0800
Commit-Message
The Innolux P097PFG panel is 9.7" panel with 1536X2048 resolution, it reuse P079ZCA panel driver, so improve p079ZCA dt-binding to support P097PFG. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - use separate file for binding - keep power supplies as required Signed-off-by: Lin Huang <hl@...> Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
.../display/panel/innolux,p097pfg.txt | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
Statistics
- 24 lines added
- 0 lines removed
Changes
----- Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt ------
new file mode 100644
index 000000000000..595d9dfeffd3
@@ -0,0 +1,24 @@
+Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p097pfg"
+- reg: DSI virtual channel of the peripheral
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &mipi_dsi {
+ panel {
+ compatible = "innolux,p079zca";
+ reg = <0>;
+ avdd-supply = <...>;
+ avee-supply = <...>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };