power: gpio-charger: add device tree support
From: Heiko Stuebner <heiko.stuebner@...> Date: Wed, 8 Aug 2012 18:58:59 -0700
Commit-Message
Add the ability to parse gpio-charger data from a devicetree node. Signed-off-by: Heiko Stuebner <heiko.stuebner@...> Reviewed-by: Doug Anderson <dianders@...> Tested-by: Doug Anderson <dianders@...>
Patch-Comment
drivers/power/gpio-charger.c | 72 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 70 insertions(+), 2 deletions(-)
Statistics
- 70 lines added
- 2 lines removed
Changes
------------------------- drivers/power/gpio-charger.c -------------------------
index a0024b2..22f084a 100644
@@ -22,6 +22,8 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/power/gpio-charger.h>
@@ -69,6 +71,59 @@ static enum power_supply_property gpio_charger_properties[] = {
POWER_SUPPLY_PROP_ONLINE,
};
+static
+struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct gpio_charger_platform_data *pdata;
+ const char *chargetype;
+ enum of_gpio_flags flags;
+ int ret;
+
+ if (!np)
+ return ERR_PTR(-ENOENT);
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ pdata->name = np->name;
+
+ pdata->gpio = of_get_gpio_flags(np, 0, &flags);
+ if (pdata->gpio < 0) {
+ if (pdata->gpio != -EPROBE_DEFER)
+ dev_err(dev, "could not get charger gpio\n");
+ return ERR_PTR(pdata->gpio);
+ }
+
+ pdata->gpio_active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
+
+ pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
+ ret = of_property_read_string(np, "charger-type", &chargetype);
+ if (ret >= 0) {
+ if (!strncmp("unknown", chargetype, 7))
+ pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
+ else if (!strncmp("battery", chargetype, 7))
+ pdata->type = POWER_SUPPLY_TYPE_BATTERY;
+ else if (!strncmp("ups", chargetype, 3))
+ pdata->type = POWER_SUPPLY_TYPE_UPS;
+ else if (!strncmp("mains", chargetype, 5))
+ pdata->type = POWER_SUPPLY_TYPE_MAINS;
+ else if (!strncmp("usb-sdp", chargetype, 7))
+ pdata->type = POWER_SUPPLY_TYPE_USB;
+ else if (!strncmp("usb-dcp", chargetype, 7))
+ pdata->type = POWER_SUPPLY_TYPE_USB_DCP;
+ else if (!strncmp("usb-cdp", chargetype, 7))
+ pdata->type = POWER_SUPPLY_TYPE_USB_CDP;
+ else if (!strncmp("usb-aca", chargetype, 7))
+ pdata->type = POWER_SUPPLY_TYPE_USB_ACA;
+ else
+ dev_warn(dev, "unknown charger type %s\n", chargetype);
+ }
+
+ return pdata;
+}
+
static int gpio_charger_probe(struct platform_device *pdev)
{
const struct gpio_charger_platform_data *pdata = pdev->dev.platform_data;
@@ -78,8 +133,13 @@ static int gpio_charger_probe(struct platform_device *pdev)
int irq;
if (!pdata) {
+ pdata = gpio_charger_parse_dt(&pdev->dev);
+ if (IS_ERR(pdata)) {
+ ret = PTR_ERR(pdata);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "No platform data\n");
+ return ret;
+ }
}
if (!gpio_is_valid(pdata->gpio)) {
@@ -103,6 +163,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
charger->get_property = gpio_charger_get_property;
charger->supplied_to = pdata->supplied_to;
charger->num_supplicants = pdata->num_supplicants;
+ charger->of_node = pdev->dev.of_node;
ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
if (ret) {
@@ -189,6 +250,12 @@ static int gpio_charger_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops,
gpio_charger_suspend, gpio_charger_resume);
+static const struct of_device_id gpio_charger_match[] = {
+ { .compatible = "gpio-charger" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpio_charger_match);
+
static struct platform_driver gpio_charger_driver = {
.probe = gpio_charger_probe,
.remove = gpio_charger_remove,
@@ -196,6 +263,7 @@ static struct platform_driver gpio_charger_driver = {
.name = "gpio-charger",
.owner = THIS_MODULE,
.pm = &gpio_charger_pm_ops,
+ .of_match_table = gpio_charger_match,
},
};