The armv7-timer on Rockchip RK3288 SoCs needs an underlying timer to run.
Therefore the special rockchip,rk3288-armv7-timer does this setup and
then initializes the architected timer using the new locally exposed
arch_timer_init.
Suggested-by: Arnd Bergmann <arnd@...>
Signed-off-by: Heiko Stuebner <heiko@...>
.../bindings/arm/rockchip/armv7-timer.txt | 22 +++++++++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/rockchip_timer.c | 57 ++++++++++++++++++++++
3 files changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/armv7-timer.txt
create mode 100644 drivers/clocksource/rockchip_timer.c
@@ -0,0 +1,22 @@
+Rockchip armv7-timer:
+---------------------
+
+The architected timer on rk3288 SoCs has special setup requirements, as
+the cpu-timer block needs to supply the architected timer.
+
+Required node properties:
+- compatible value : = "rockchip,rk3288-armv7-timer";
+- reg : physical base address and the size of the registers window
+ of the supplying timer block
+- CP15 Timer node properties as described in bindings/arm/arch_timer.txt
+
+Example:
+
+architected-timer {
+ compatible = "rockchip,rk3288-armv7-timer";
+ reg = <0xff810020 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+};
@@ -20,6 +20,7 @@ obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
+obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip_timer.o
obj-$(CONFIG_ARCH_U300) += timer-u300.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clockchips.h>
+#include "arm_arch_timer.h"
+
+#define TIMER_LOAD_COUNT0 0x00
+#define TIMER_LOAD_COUNT1 0x04
+#define TIMER_CURRENT_VALUE0 0x08
+#define TIMER_CURRENT_VALUE1 0x0c
+#define TIMER_CONTROL_REG 0x10
+#define TIMER_INT_STATUS 0x18
+
+#define TIMER_DISABLE (0 << 0)
+#define TIMER_ENABLE (1 << 0)
+#define TIMER_MODE_FREE_RUNNING (0 << 1)
+#define TIMER_MODE_USER_DEFINED_COUNT (1 << 1)
+#define TIMER_INT_MASK (0 << 2)
+#define TIMER_INT_UNMASK (1 << 2)
+
+static __init void rk3288_arch_timer_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+
+ reg_base = of_io_request_and_map(np, 0, "rk3288-armv7-timer");
+ if (!reg_base) {
+ pr_warn("%s: Can't get resource\n", __func__);
+ return;
+ }
+
+ writel(TIMER_DISABLE, reg_base + TIMER_CONTROL_REG);
+
+ writel(0xffffffff, reg_base + TIMER_LOAD_COUNT0);
+ writel(0xffffffff, reg_base + TIMER_LOAD_COUNT1);
+
+ writel(TIMER_ENABLE | TIMER_MODE_FREE_RUNNING,
+ reg_base + TIMER_CONTROL_REG);
+
+ arch_timer_init(np);
+}
+CLOCKSOURCE_OF_DECLARE(rk3288_arch_timer, "rockchip,rk3288-armv7-timer",
+ rk3288_arch_timer_init);