rockchip: px30: sync the main px30 dtsi from mainline
From: Heiko Stuebner <heiko.stuebner@...> Date: Wed, 22 Jan 2020 10:19:03 +0100
Commit-Message
There have been multiple peripherals added to the main px30 dtsi in the Linux kernel since its addition to u-boot. So to make it easier to sync board devicetrees, update the core dtsi from Linux. Signed-off-by: Heiko Stuebner <heiko.stuebner@...>
Patch-Comment
arch/arm/dts/px30.dtsi | 182 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 171 insertions(+), 11 deletions(-)
Statistics
- 171 lines added
- 11 lines removed
Changes
---------------------------- arch/arm/dts/px30.dtsi ----------------------------
index 0d2325a77f..b6c79e7ed3 100644
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/px30-power.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,px30";
@@ -113,16 +114,11 @@
compatible = "operating-points-v2";
opp-shared;
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000 950000 1350000>;
clock-latency-ns = <40000>;
+ opp-suspend;
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
@@ -186,6 +182,55 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ thermal_zones: thermal-zones {
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <750>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ threshold: trip-point-0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: trip-point-1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc_crit: soc-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+
+ map1 {
+ trip = <&target>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&tsadc 1>;
+ };
+ };
+
xin24m: xin24m {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -370,6 +415,36 @@
compatible = "rockchip,px30-io-voltage-domain";
status = "disabled";
};
+
+ lvds: lvds {
+ compatible = "rockchip,px30-lvds";
+ phys = <&dsi_dphy>;
+ phy-names = "dphy";
+ rockchip,grf = <&grf>;
+ rockchip,output = "lvds";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_vopb_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+
+ lvds_vopl_in: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
+ };
+ };
+ };
};
uart1: serial@ff158000 {
@@ -650,6 +725,26 @@
};
};
+ tsadc: tsadc@ff280000 {
+ compatible = "rockchip,px30-tsadc";
+ reg = <0x0 0xff280000 0x0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <50000>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ rockchip,grf = <&grf>;
+ rockchip,hw-tshut-temp = <120000>;
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&tsadc_otp_gpio>;
+ pinctrl-1 = <&tsadc_otp_out>;
+ pinctrl-2 = <&tsadc_otp_gpio>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
saradc: saradc@ff288000 {
compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
reg = <0x0 0xff288000 0x0 0x100>;
@@ -706,12 +801,48 @@
#reset-cells = <1>;
};
+ usb2phy_grf: syscon@ff2c0000 {
+ compatible = "rockchip,px30-usb2phy-grf", "syscon",
+ "simple-mfd";
+ reg = <0x0 0xff2c0000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2-phy@100 {
+ compatible = "rockchip,px30-usb2phy";
+ reg = <0x100 0x20>;
+ clocks = <&pmucru SCLK_USBPHY_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&cru USB480M>;
+ assigned-clock-parents = <&u2phy>;
+ clock-output-names = "usb480m_phy";
+ status = "disabled";
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+
+ u2phy_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ status = "disabled";
+ };
+ };
+ };
+
dsi_dphy: phy@ff2e0000 {
compatible = "rockchip,px30-dsi-dphy";
reg = <0x0 0xff2e0000 0x0 0x10000>;
clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
clock-names = "ref", "pclk";
resets = <&cru SRST_MIPIDSIPHY_P>;
reset-names = "apb";
#phy-cells = <0>;
@@ -731,6 +862,8 @@
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
g-use-dma;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
@@ -741,6 +874,8 @@
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
@@ -751,6 +886,8 @@
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
@@ -823,17 +960,30 @@
status = "disabled";
};
+ gpu: gpu@ff400000 {
+ compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+ reg = <0x0 0xff400000 0x0 0x4000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&cru SCLK_GPU>;
+ #cooling-cells = <2>;
+ power-domains = <&power PX30_PD_GPU>;
+ status = "disabled";
+ };
+
dsi: dsi@ff450000 {
compatible = "rockchip,px30-mipi-dsi";
reg = <0x0 0xff450000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_MIPI_DSI>;
+ clock-names = "pclk";
phys = <&dsi_dphy>;
phy-names = "dphy";
power-domains = <&power PX30_PD_VO>;
+ resets = <&cru SRST_MIPIDSI_HOST_P>;
+ reset-names = "apb";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
@@ -883,6 +1033,11 @@
reg = <0>;
remote-endpoint = <&dsi_in_vopb>;
};
+
+ vopb_out_lvds: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds_vopb_in>;
+ };
};
};
@@ -920,6 +1075,11 @@
reg = <0>;
remote-endpoint = <&dsi_in_vopl>;
};
+
+ vopl_out_lvds: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds_vopl_in>;
+ };
};
};