ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
From: Heiko Stuebner <heiko@...> Date: Wed, 10 Sep 2014 17:04:36 +0200
Commit-Message
Add the controller node, pinctrl settings for the customizable pins and sort the controllers like on rk3288 as emmc, sdmmc, sdio for handling convenience. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
arch/arm/boot/dts/rk3066a.dtsi | 21 +++++++++++++++++++++ arch/arm/boot/dts/rk3188.dtsi | 21 +++++++++++++++++++++ arch/arm/boot/dts/rk3xxx.dtsi | 14 ++++++++++++++ 3 files changed, 56 insertions(+)
Statistics
- 56 lines added
- 0 lines removed
Changes
------------------------ arch/arm/boot/dts/rk3066a.dtsi ------------------------
index 8021eed..ad9c2db 100644
@@ -179,6 +179,27 @@
bias-disable;
};
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_rst: emmc-rst {
+ rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ /*
+ * The data pins are shared between nandc and emmc and
+ * not accessible through pinctrl. Also they should've
+ * been already set correctly by firmware, as
+ * flash/emmc is the boot-device.
+ */
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
------------------------ arch/arm/boot/dts/rk3188.dtsi -------------------------
index 573ef61..9a1ff0b 100644
@@ -147,6 +147,27 @@
bias-disable;
};
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_rst: emmc-rst {
+ rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ /*
+ * The data pins are shared between nandc and emmc and
+ * not accessible through pinctrl. Also they should've
+ * been already set correctly by firmware, as
+ * flash/emmc is the boot-device.
+ */
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
------------------------ arch/arm/boot/dts/rk3xxx.dtsi -------------------------
index 7bcd698..c383f5c 100644
@@ -26,6 +26,9 @@
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
+ mshc0 = &emmc;
+ mshc1 = &mmc0;
+ mshc2 = &mmc1;
spi0 = &spi0;
spi1 = &spi1;
};
@@ -137,6 +140,17 @@
status = "disabled";
};
+ emmc: dwmmc@1021c000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x1021c000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
+ };
+
pmu: pmu@20004000 {
compatible = "rockchip,rk3066-pmu", "syscon";
reg = <0x20004000 0x100>;