ARM: dts: rockchip: enable gmac on rk3288-firefly
From: Heiko Stuebner <heiko@...> Date: Fri, 20 Feb 2015 01:31:57 +0100
Commit-Message
This was left out of the original firefly board definition due to the ethernet support going completely through the network tree, making the underlying nodes unavailable. Now that everything is present enable the gmac on the firefly. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
arch/arm/boot/dts/rk3288-firefly.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
Statistics
- 16 lines added
- 0 lines removed
Changes
-------------------- arch/arm/boot/dts/rk3288-firefly.dtsi ---------------------
index b9dda41..b54dd78 100644
@@ -179,6 +179,22 @@
status = "okay";
};
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";