arm64: dts: rockchip: move core edp from rk3399-kevin to
From: Heiko Stuebner <heiko@...> Date: Sat, 2 Jun 2018 16:06:30 +0200
Commit-Message
Bob needs the same backlight and core edp settings, so move these node to the shared dtsi that both will use as a base. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 34 ++++++++++++++++ .../boot/dts/rockchip/rk3399-gru-kevin.dts | 39 ++----------------- 2 files changed, 38 insertions(+), 35 deletions(-)
Statistics
- 38 lines added
- 35 lines removed
Changes
----------- arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi ------------
index 32139e6910a3..8cce0f59d2ea 100644
@@ -191,6 +191,23 @@
vin-supply = <&pp1800_pcie>;
};
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ 17 18 19 20 21 22 23 24 25 26 27 28 29 30
+ 31 32 33 34 35 36 37 38 39 40 41 42 43 44
+ 45 46 47 48 49 50 51 52 53 54 55 56 57 58
+ 59 60 61 62 63 64 65 66 67 68 69 70 71 72
+ 73 74 75 76 77 78 79 80 81 82 83 84 85 86
+ 87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
+ default-brightness-level = <51>;
+ enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ power-supply = <&pp3300_disp>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ pwm-delay-us = <10000>;
+ };
};
&ppvar_bigcpu {
@@ -212,6 +229,23 @@
extcon = <&usbc_extcon0>, <&usbc_extcon1>;
};
+&edp {
+ status = "okay";
+
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
ap_i2c_mic: &i2c1 {
status = "okay";
-------------- arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts ---------------
index e582ec9fbc97..2cc7c47d6a85 100644
@@ -38,24 +38,6 @@
vin-supply = <&pp3300>;
};
edp_panel: edp-panel {
compatible = "sharp,lq123p1jx31", "simple-panel";
backlight = <&backlight>;
@@ -87,6 +69,10 @@
};
};
+&backlight {
+ pwms = <&cros_ec_pwm 1>;
+};
+
&gpio_keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
@@ -243,23 +229,6 @@ ap_i2c_dig: &i2c2 {
};
};
&ppvar_bigcpu_pwm {
regulator-min-microvolt = <798674>;
regulator-max-microvolt = <1302172>;