From a9f6059bd44b362a80e0a28148a816bcacb96373 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sun, 4 Aug 2024 16:06:21 +0200 Subject: [PATCH 2/2] arm64: dts: rockchip: add product-data eeproms to QNAP TS433 The device contains two i2c-connected eeproms holding some product- specific values. One sitting on the mainboard and one on the statically connected backplane. While the eeprom chips themself have a size of 512 byte, the eeprom data only uses 256 byte each, probably to stay compatible with other models. Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3568-qnap-ts433.dts | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index 110c323786848..7bd32d230ad2f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -458,6 +458,26 @@ rtc_rv8263: rtc@51 { reg = <0x51>; wakeup-source; }; + + /* eeprom for vital-product-data on the mainboard */ + eeprom@54 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x54>; + label = "VPD_MB"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; + + /* eeprom for vital-product-data on the backplane */ + eeprom@56 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x56>; + label = "VPD_BP"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; }; &mdio0 { -- 2.39.2