From 29e0bd42d142fcf4cad4949cdde8e4731fc583b1 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 20 Jul 2024 21:30:03 +0200 Subject: [PATCH 6/8] arm64: dts: rockchip: enable sata1+2 on Qnap-TS433 The TS433 has 4 bays. The last two are accessed via a pci-connected sata controller, while the first two are accessed via the rk3568's sata controllers. Enable these two now. Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3568-qnap-ts433.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index 4fbbdb735eb58..69bed01cbe4ed 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -80,6 +80,16 @@ &combphy0 { status = "okay"; }; +/* connected to sata1 */ +&combphy1 { + status = "okay"; +}; + +/* connected to sata2 */ +&combphy2 { + status = "okay"; +}; + &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; @@ -154,6 +164,14 @@ vcc5v0_otg_en: vcc5v0-otg-en { }; }; +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; -- 2.39.2