From a1eb3a53a615c914ea1ea1dd5bbbee644c89ff75 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 19 Jan 2024 11:10:09 +0100 Subject: [PATCH] arm64: dts: rockchip: set num-cs property for spi on px30 The px30 has two spi controllers with two chip-selects each. The num-cs property is specified as the total number of chip selects a controllers has and is used since 2020 to find uses of chipselects outside that range in the Rockchip spi driver. Without the property set, the default is 1, so spi devices using the second chipselect will not be created. Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods") Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 42ce78beb413..20955556b624 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -632,6 +632,7 @@ spi0: spi@ff1d0000 { clock-names = "spiclk", "apb_pclk"; dmas = <&dmac 12>, <&dmac 13>; dma-names = "tx", "rx"; + num-cs = <2>; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>; #address-cells = <1>; @@ -647,6 +648,7 @@ spi1: spi@ff1d8000 { clock-names = "spiclk", "apb_pclk"; dmas = <&dmac 14>, <&dmac 15>; dma-names = "tx", "rx"; + num-cs = <2>; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>; #address-cells = <1>; -- 2.39.2