arm64: dts: rockchip: add usb2phy for px30
From: Heiko Stuebner <heiko@...> Date: Thu, 12 Sep 2019 15:06:34 +0200
Commit-Message
Add the usb2phy node on the px30 and hook it up to the usb controllers it supplies. Signed-off-by: Heiko Stuebner <heiko@...>
Patch-Comment
arch/arm64/boot/dts/rockchip/px30.dtsi | 43 ++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
Statistics
- 43 lines added
- 0 lines removed
Changes
-------------------- arch/arm64/boot/dts/rockchip/px30.dtsi --------------------
index 9ad1c2f04ea9..837e421cc30f 100644
@@ -701,6 +701,43 @@
<26000000>;
};
+ usb2phy_grf: syscon@ff2c0000 {
+ compatible = "rockchip,px30-usb2phy-grf", "syscon",
+ "simple-mfd";
+ reg = <0x0 0xff2c0000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2-phy@100 {
+ compatible = "rockchip,px30-usb2phy";
+ reg = <0x100 0x20>;
+ clocks = <&pmucru SCLK_USBPHY_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&cru USB480M>;
+ assigned-clock-parents = <&u2phy>;
+ clock-output-names = "usb480m_phy";
+ status = "disabled";
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+
+ u2phy_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ status = "disabled";
+ };
+ };
+ };
+
usb20_otg: usb@ff300000 {
compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
"snps,dwc2";
@@ -713,6 +750,8 @@
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
g-use-dma;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
@@ -723,6 +762,8 @@
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
@@ -733,6 +774,8 @@
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};