ARM: dts: rockchip: convert pinctrl nodes to new bindings
From: Heiko Stuebner <heiko@...> Date: Tue, 29 Apr 2014 22:02:52 +0200
Commit-Message
Introduce the grf syscon and convert the pinctrl drivers for rk3066 and rk3188 to use it, instead of mapping the grf registers themselfs. Signed-off-by: Heiko Stuebner <heiko@...> Tested-by: Max Schwarz <max.schwarz@...>
Patch-Comment
arch/arm/boot/dts/rk3066a.dtsi | 2 +- arch/arm/boot/dts/rk3188.dtsi | 9 ++++----- arch/arm/boot/dts/rk3xxx.dtsi | 9 +++++++-- 3 files changed, 12 insertions(+), 8 deletions(-)
Statistics
- 12 lines added
- 8 lines removed
Changes
------------------------ arch/arm/boot/dts/rk3066a.dtsi ------------------------
index 4d4dfbb..048c5de 100644
@@ -79,7 +79,7 @@
pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
+ rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
------------------------ arch/arm/boot/dts/rk3188.dtsi -------------------------
index ed9a70a..a494fb0 100644
@@ -75,17 +75,16 @@
pinctrl@20008000 {
compatible = "rockchip,rk3188-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@0x2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
+ reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 9>;
------------------------ arch/arm/boot/dts/rk3xxx.dtsi -------------------------
index 26e5a96..2adf1cc9e 100644
@@ -31,11 +31,16 @@
reg = <0x1013c000 0x100>;
};
+ pmu: pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu", "syscon";
reg = <0x20004000 0x100>;
};
+ grf: grf@20008000 {
+ compatible = "syscon";
+ reg = <0x20008000 0x200>;
+ };
+
gic: interrupt-controller@1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;