dt-bindings: add binding for Rockchip hdmi phy using an

A patch from »dt-bindings: add binding for Rockchip hdmi phy using an« in state Maintainer-tree for linux-kernel

From: Zheng Yang <zhengyang@...> Date: Sun, 10 Dec 2017 16:37:59 +0100

Commit-Message

The phy is used so far in two Rockchip socs the rk3228 and the rk3328. Signed-off-by: Zheng Yang <zhengyang@...> Signed-off-by: Heiko Stuebner <heiko@...> Reviewed-by: Rob Herring <robh@...>

Patch-Comment

changes in v3: - describe both refclks supplied to the phy block .../bindings/phy/phy-rockchip-inno-hdmi.txt | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt

Statistics

  • 43 lines added
  • 0 lines removed

Changes

------- Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt -------
new file mode 100644
index 000000000000..710cccd5ee56
@@ -0,0 +1,43 @@
+ROCKCHIP HDMI PHY WITH INNO IP BLOCK
+
+Required properties:
+ - compatible : should be one of the listed compatibles:
+ * "rockchip,rk3228-hdmi-phy",
+ * "rockchip,rk3328-hdmi-phy";
+ - reg : Address and length of the hdmi phy control register set
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must contain "sysclk" for system
+ control and register configuration, "refoclk" for crystal-
+ oscillator reference PLL clock input and "refpclk" for pclk-
+ based refeference PLL clock input.
+ - #clock-cells: should be 0.
+ - clock-output-names : shall be the name for the output clock.
+ - interrupts : phandle + interrupt specified for the hdmiphy interrupt
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+
+Optional properties for rk3328-hdmi-phy:
+ - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
+ - nvmem-cell-names : "cpu-version" to read the chip version, required
+ for adjustment to some frequency settings
+
+Example:
+ hdmi_phy: hdmi-phy@12030000 {
+ compatible = "rockchip,rk3228-hdmi-phy";
+ reg = <0x12030000 0x10000>;
+ #phy-cells = <0>;
+ clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ #clock-cells = <0>;
+ clock-output-names = "hdmi_phy";
+ status = "disabled";
+ };
+
+Then the PHY can be used in other nodes such as:
+
+ hdmi: hdmi@200a0000 {
+ compatible = "rockchip,rk3228-dw-hdmi";
+ ...
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ ...
+ };
 
 

Recent Patches

About Us

Sed lacus. Donec lectus. Nullam pretium nibh ut turpis. Nam bibendum. In nulla tortor, elementum vel, tempor at, varius non, purus. Mauris vitae nisl nec metus placerat consectetuer.

Read More...